Commandes de l'API de la MetaServlet de Talend Administration Center
Dans cette section, vous pouvez voir toutes les commandes exécutables dans la MetaServlet.
Si vous n'utilisez pas la dernière version de la MetaServlet, certaines des commandes suivantes peuvent être indisponibles. Il est recommandé de consulter la commande d'aide de la version de votre MetaServlet.
Note InformationsAvertissement : Le partage de ressources d'origine croisée n'est pas supporté dans l'API de la Metaservlet de Talend Administration Center.
Envoyer un script de MetaServlet
Pour envoyer un script de MetaServlet, suivez cette syntaxe :
| Plateforme | Format |
|---|---|
| Windows | Si vous copiez-collez tous les paramètres : |
| Linux | Si vous copiez-collez tous les paramètres : |
Commande d'aide exhaustive
Pour afficher l'aide exhaustive de toutes les commandes, suivez cette syntaxe :
- Format Windows
MetaservletCaller.bat --tac-url=http://<IP_address>:<port>/<WebApplicationName> --help all - Format Linux
MetaservletCaller.sh --tac-url=http://<IP_address>:<port>/<WebApplicationName> --help all
Résultat
Résultat de la commande --help :
Note InformationsRemarque : Les commandes exécutent uniquement les paramètres compris dans les échantillons. Les paramètres en-dehors des échantillons sont invalides et ignorés.
Note InformationsRemarque :
Il est possible que vous deviez ajouter un ou plusieurs guillemets dans les valeurs de paramètres JSON comme les tableaux et les valeurs ayant des caractères spécifiques, par exemple, 'daysOfWeek':''2,3,4,5,6''. Sinon, vous obtenez des erreurs.
Le paramètre en notation scientifique sera reconnu comme une chaîne de caractères, s'il est entouré de guillemets simples et en tant que grand nombre, s'il est entouré de guillemets doubles ou pas entouré de guillemets du tout. Cependant, dans le cas d'un grand nombre, le format sera modifié lors de l'affichage, par exemple, '1e56886' devient '1E+56886'. Dans ce cas, des scénarios spécifiques peuvent conduire à un comportement différent entre l'interface et la MetaServlet. Par exemple, un '+' ne peut être ajouté à un libellé de tâche dans l'interface, mais peut être ajouté via la MetaServlet.
Generic return codes :
0: Success
1: Unknown error
2: Invalid request
3: Authentication error
4: License problem
5: Invalid parameter
6: Error formatting response
7: Insufficient right
----------------------------------------------------------
Command: addLocks
----------------------------------------------------------
Description : Allow to lock a repository item. Mainly used by the Studio.
Requires authentication : false
Requires rights : Lock management
Since : 4.2
Sample :
{
'actionName': 'addLocks',
'applicationName': 'Studio',
'authUser': 'john.smith@company.com',
'branch': 'trunk',
'locks': [{
'itemId': 'id1',
'itemLabel': 'label1',
'itemType': 'repository.process'
}],
'projectName': 'P1'
}
----------------------------------------------------------
Command: addServer
----------------------------------------------------------
Description : Create a new execution server, parameter username/password (optional) are used for user authentication to access the JobServer,
- For server type Runtime, you must provide the 'instance' property,
- For 'timezone' property, refer to http://joda-time.sourceforge.net/timezones.html for more details on the syntax
Requires authentication : true
Requires rights : Server management
Since : 4.2
Sample :
{
'actionName': 'addServer',
'adminConsolePort': 8040,
'authPass': 'admin',
'authUser': 'admin@company.com',
'commandPort': 8000,
'description': Talend Runtime server in production',
'filePort': 8001,
'host': 'localhost',
'instance': 'trun',
'label': 'serverName1',
'mgmtRegPort': 1099,
'mgmtServerPort': 44444,
'monitoringPort': 8888,
'password': 111111,
'processMessagePort': 8555,
'runtimePassword': 'password',
'runtimeUsername': 'name',
'timeoutUnknownState': '120',
'timezoneId': 'US/Hawaii',
'useHttpsForAdminConsole': true,
'useSSL': true,
'username': 'test@company.com'
}
Specific error codes :
235: The timezoneId value is not found.
236: The 'instance' and 'awsEC2Server' properties are incompatible.
----------------------------------------------------------
Command: addServersToVirtualServer
----------------------------------------------------------
Description : Add servers to a virtual server
Requires authentication : true
Requires rights : Server management
Since : 5.6
Sample :
{
'actionName': 'addServersToVirtualServer',
'authPass': 'admin',
'authUser': 'admin@company.com',
'servers': [
{'serverId': '1'},
{'serverId': '2'}
],
'virtualServerId': '1'
}
----------------------------------------------------------
Command: addTaskParam
----------------------------------------------------------
Description : Add a new jvm parameter to task.
- active: defines is jvm parameter active or not.
- jvmParam: jvm parameter to be added.
- uniqueId: the unique id of the task jvm param be added. The uniqueId or taskId must be provided.
- taskId: the task id of the task jvm param be added. The uniqueId or taskId must be provided.
- description: [optional] the description of the jvm parameter.
Requires authentication : true
Requires rights : Job conductor author
Since : 7.2
Sample :
{
'actionName': 'addTaskParam',
'active': true,
'authPass': 'admin',
'authUser': 'admin@company.com',
'description': 'Any description.',
'jvmParam': '-Xmx256m',
'taskId': 1,
'uniqueId': 'edb73b78-043e-442a-beb4-838d355b56b9'
}
----------------------------------------------------------
Command: addUsersToUserGroup
----------------------------------------------------------
Description : Add users to User Group
Requires authentication : true
Requires rights : User management
Since : 6.2
Sample :
{
'actionName': 'addUsersToUserGroup',
'authPass': 'admin',
'authUser': 'admin@company.com',
'id': '1',
'users': [
{'id': '10'},
{'id': '21'}
]
}
----------------------------------------------------------
Command: associatePreGeneratedJob
----------------------------------------------------------
Description : Create a new execution task with a pre-generated zip file
- targetConductor: could be [JOBCONDUCTOR, BIGDATA_STREAMING]. 'JOBCONDUCTOR' is the default value.
- nexusRepository: [Since 6.4] if create task from Nexus, using parameters: nexusRepository/nexusGroupId/nexusArtifactId/nexusVersion[/nexusJobVersionSuffix].
- nexusJobVersionSuffix: [Optional. Since 6.4] use it when job in nexus with named like test-1.0.0-20170516.043751-1.zip
- taskType: [Optional. Since 6.4] Distinguish task type: Normal/Artifact, default: Normal
- importType: [Since 6.2] the position where select the zip file from; 'Nexus' or 'File', default value is 'File'. [Since 7.1] can also select value 'Artifactory'
- artifactoryRepository: [Since 7.1] if create task from Artifactory, using parameters: artifactoryRepository/artifactoryGroupId/artifactoryArtifactId/artifactoryVersion[/artifactoryJobVersionSuffix].
- artifactoryJobVersionSuffix: [Optional. Since 7.1] use it when job in Artifactory with named like test-1.0.0-20170516.043751-1.zip
- execStatisticsEnabled:[true|false]. Enables or disables statistics for the newly created job.
- loglevel: [Trace|Debug|Info|Warn|Error|Fatal|Off]. Sets the log level for the newly created job.
Requires authentication : true
Requires rights : Job conductor author
Since : 5.2
Sample :
{
'actionName': 'associatePreGeneratedJob',
'active': true,
'artifactoryArtifactId': 'test',
'artifactoryGroupId': 'org.example',
'artifactoryJobVersionSuffix': '0.2.0-20170516.043751-1',
'artifactoryRepository': 'release',
'artifactoryVersion': '0.2.0-SNAPSHOT',
'authPass': 'admin',
'authUser': 'admin@company.com',
'contextName': 'Default',
'description': 'task1's description',
'executionServerName': 'serv1',
'filePath': ''/home/talend/generatedJob.zip'',
'importType': 'Nexus',
'logLevel': 'Info',
'nexusArtifactId': 'test',
'nexusGroupId': 'org.example',
'nexusJobVersionSuffix': '1.0.0-20170516.043751-1',
'nexusRepository': 'snapshots',
'nexusVersion': '0.1.0-SNAPSHOT',
'onUnknownStateJob': 'WAIT',
'pauseOnError': false,
'runAsUser': 'OS_User',
'taskName': 'task1',
'taskType': 'Artifact',
'timeout': 3600
}
Specific error codes :
180: file is not a valid file or not exist
181: nexus parameters may be not correct
----------------------------------------------------------
Command: branchExist
----------------------------------------------------------
Description : Returns true if the project contains the branch.
Requires authentication : true
Requires rights : Project visualization
Since : 6.0
Sample :
{
'actionName': 'branchExist',
'authPass': 'admin',
'authUser': 'admin@company.com',
'branch': 'branches/branch1',
'projectName': 'project1'
}
----------------------------------------------------------
Command: createAuthorization
----------------------------------------------------------
Description : Add user/group authorization to a project.
- authorizationType can be [READ_WRITE_LITERAL, READ_ONLY_LITERAL]
- authorizationEntity can be [User, Group], default value is 'User'
Requires authentication : true
Requires rights : Project management
Since : 3.2
Sample :
{
'actionName': 'createAuthorization',
'authPass': 'admin',
'authUser': 'admin@company.com',
'authorizationEntity': 'User',
'authorizationType': 'ReadWrite',
'groupLabel': 'group',
'projectName': 'project',
'userLogin': 'user@company.com'
}
Specific error codes :
161: The authorizationType specified does not exist.
162: The authorizationEntity specified does not exist.
----------------------------------------------------------
Command: createBranch
----------------------------------------------------------
Description : Create a branch into a project
Requires authentication : true
Requires rights : Project management
Since : 4.2
Sample :
{
'actionName': 'createBranch',
'authPass': 'admin',
'authUser': 'admin@company.com',
'projectName': 'project1',
'source': 'trunk',
'target': 'branches/branch1'
}
Specific error codes :
150: Database error while creating branch.
----------------------------------------------------------
Command: createProject
----------------------------------------------------------
Description : Create a new GIT project and return the project ID.
- TAC will get GIT url from configuration when 'projectGitLocation' is not provided;
- When 'projectGitLocation' is used, then 'gitLogin' and 'gitPassword' must be provided
- setting for 'gitCommitMode', 'gitLockMode' and 'gitUserLog' is optional
- 'gitCommitMode' : [AUTO|SEMI] AUTO for 'Automatic', SEMI for 'Unlocked Items', default value is AUTO
- 'gitLockMode' : [AUTO|ASK|MANUAL] AUTO for 'Automatic', ASK for 'Ask user', MANUAL for 'Manual', default value is AUTO
- 'gitUserLog' :[true|false], default value is false
- Notice : Git options supported since 6.1.
- 'defaultBranch': to specify the default branch when the GIT repository is empty (default is 'main' if this parameter is not specified).
Requires authentication : true
Requires rights : Project management
Since : 3.2
Sample :
{
'actionName': 'createProject',
'addTechNameAtURL': true,
'authPass': 'admin',
'authUser': 'admin@company.com',
'projectName': 'project1',
'projectType': '[DI|DQ|MDM] (optional)',
'storage': '[git|none] (default is 'git')',
'defaultBranch': 'master (optional)'
}
Specific error codes :
11: Git url not set in configuration
----------------------------------------------------------
Command: createSandboxProject
----------------------------------------------------------
Description : Allows to create a Sandbox project (internal use)
Requires authentication : false
Requires rights : Job conductor author, Project management
Since : 4.2
Sample :
{
'actionName': 'createSandboxProject',
'projectName': 'MetaProject2',
'userFirstName': 'David',
'userLastName': 'Bowie',
'userLogin': 'userSandbox4@talend.com',
'userPassword': 'admin',
'projectType':'DQ',
'userType':'DQ'
}
----------------------------------------------------------
Command: createServerProjectAuthorization
----------------------------------------------------------
Description : Add server authorization to a project.
- application will retrive job server if argument'isVirtualServer' is omitted
Requires authentication : true
Requires rights : Server management
Since : 6.1
Sample :
{
'actionName': 'createServerProjectAuthorization',
'authPass': 'admin',
'authUser': 'admin@company.com',
'isVirtualServer': false,
'projectName': 'projectA',
'serverName': 'jobServerA'
}
----------------------------------------------------------
Command: createTag
----------------------------------------------------------
Description : Create a tag into a project
Requires authentication : true
Requires rights : Tags management
Since : 5.3
Sample :
{
'actionName': 'createTag',
'authPass': 'admin',
'authUser': 'admin@company.com',
'projectName': 'project1',
'source': 'trunk',
'target': 'tags/tag-1_0'
}
Specific error codes :
151: Database error while creating tag.
----------------------------------------------------------
Command: createTrigger
----------------------------------------------------------
Description : Create a trigger.
- 'taskId' : it could be the task id, exec plan id, esb publisher id
- 'timezoneOption': must be one of those values [JOBSERVER_TIMEZONE, TAC_TIMEZONE, CUSTOM_TIMEZONE]
- if this option is 'CUSTOM_TIMEZONE', the field 'timezone' becomes mandatory.
- For 'timezone' property, refer to http://joda-time.sourceforge.net/timezones.html for more details on the syntax
- 'pauseOnError' : if set to true, pause the trigger when the task fail.
Requires authentication : true
Requires rights : Job conductor create trigger
Since : 5.6
Sample :
{'Samples': [
{
'actionName': 'createTrigger',
'authPass': 'admin',
'authUser': 'admin@company.com',
'description': 'This is a simple trigger',
'endTime': '2016-12-31 23:59:59',
'label': 'SimpleTrigger1',
'pauseOnError': true,
'repeatCount': 10,
'repeatInterval': 120,
'startTime': '2016-12-31 11:40:16',
'taskId': 1,
'timezone': ''Europe/Paris'',
'timezoneOption': 'CUSTOM_TIMEZONE',
'triggerType': 'SimpleTrigger'
},
{
'actionName': 'createTrigger',
'authPass': 'admin',
'authUser': 'admin@company.com',
'daysOfMonth': '10',
'description': 'This is a cron trigger',
'hours': '5,10',
'label': 'CronTrigger1',
'minutes': '1,10',
'months': '*',
'pauseOnError': true,
'taskId': 1,
'timezoneOption': 'JOBSERVER_TIMEZONE',
'triggerType': 'CronTrigger',
'years': '2016'
},
{
'actionName': 'createTrigger',
'authPass': 'admin',
'authUser': 'admin@company.com',
'checkTimeInterval': 120,
'created': true,
'description': 'This is a file trigger',
'executionServerId': 1,
'exist': true,
'fileMask': '*',
'folderPath': '/home/tac',
'label': 'FileTrigger1',
'modified': false,
'pauseOnError': true,
'taskId': 1,
'triggerType': 'FileTrigger'
}
]}
----------------------------------------------------------
Command: createUser
----------------------------------------------------------
Description : create a new user.
- 'count_policy' : [Since 6.0]. [NAMED|CONCURRENT] NAMED for 'Named users', CONCURRENT for 'Concurrent users', default value is CONCURRENT
- 'userGitLogin/userGitPassword' : [Since 6.1].
- 'userGroup/dataPrep/dataPrepRole' : [Since 6.2].
- 'tds/tdsRole' : [Since 6.3].
- 'mdm/mdmRole' : [Since 6.5].
- 'userDn' : [Since 6.4] Distinguished Name. When LDAP enabled, only allow to create LDAP user.
- 'bigDara' : [Since 6.4, Optional].
- 'dqDict/'dqDictRole : [Since 7.1, Optional].
Requires authentication : true
Requires rights : User management
Since : 3.2
Sample :
{
'actionName': 'createUser',
'active': true,
'authPass': 'admin',
'authUser': 'admin@company.com',
'bigData': true,
'count_policy': 'NAMED',
'dataPrep': true,
'dataPrepRole': [
'Administrator',
'Dataset Manager',
'Data Preparator'
],
'dqDict': true,
'dqDictRole': [
'Semantic_types_manager',
'Semantic_types_viewer'
],
'encryptedPassword': true,
'mdm': true,
'mdmRole': 'System_Web',
'tds': true,
'tdsRole': [
'Data Steward',
'Campaign Owner'
],
'userDn': 'cn=jsmith,ou=test,dc=company,dc=com',
'userFirstName': 'john',
'userGitLogin': 'jsmith',
'userGitPassword': '7ob5iT3c',
'userGroup': [],
'userLastName': 'smith',
'userLogin': 'john.smith@company.com',
'userPassword': 'kkE432',
'userRole': [
'Security Administrator',
'Administrator',
'Viewer',
'Operation manager',
'Auditor',
'Designer',
'Administrative Use'
],
'userType': 'DI'
}
Specific error codes :
100: Database error while creating a new User.
101: Not enough allowed users available against license.
----------------------------------------------------------
Command: createUserGroup
----------------------------------------------------------
Description : create a new user group. dataPrepRoles is only valid when type is DP. tdsRoles is only valid when type is TDS. mdmRoles is only valid when type is MDM_WEB
- 'type' : [DI_ESB|DQ|MDM|DP|TDS|MDM_WEB| DIC_SERV]
- 'dataPrepRoles' : [Administrator|Dataset Manager|Data Preparator]
- 'tdsRoles' : [Data Steward|Campaign Owner]
- 'mdmRoles' : [System_Admin|System_Interactive|System_Web|Super_Admin]
- 'dqDictRole' : [Semantic_types_manager|Semantic_types_viewer]
Requires authentication : true
Requires rights : User management
Since : 6.2
Sample :
{
'actionName': 'createUserGroup',
'authPass': 'admin',
'authUser': 'admin@company.com',
'description': 'User group for testing perpose',
'label': 'Test Group',
'type': 'DI_ESB'
}
----------------------------------------------------------
Command: createVirtualServer
----------------------------------------------------------
Description : Create a virtual execution server
- For 'timezone' property, refer to http://joda-time.sourceforge.net/timezones.html for more details on the syntax
Requires authentication : true
Requires rights : Server management
Since : 5.6
Sample :
{
'actionName': 'createVirtualServer',
'authPass': 'admin',
'authUser': 'admin@company.com',
'clusterGroup': 'Cellar1',
'description': 'Talend virtual server in production',
'label': 'VirtualServerName',
'timezone': 'US/Pacific'
}
Specific error codes :
238: The timezoneId value is not found.
----------------------------------------------------------
Command: deleteAuthorization
----------------------------------------------------------
Description : Delete user/group authorization to a project
authorizationEntity can be [User, Group] and its default value is "User"
Requires authentication : true
Requires rights : Project management
Since : 8.0
Sample :
{
'actionName': 'deleteAuthorization',
'authPass': 'admin',
'authUser': 'admin@company.com',
'authorizationEntity': 'User' or 'Group',
'projectName': 'project',
'userLogin': 'user@company.com' or 'groupLabel': 'group'
}
----------------------------------------------------------
Command: deleteBranch
----------------------------------------------------------
Description : Delete branches/tags
Requires authentication : true
Requires rights : Project management
Since : 5.6
Sample :
{
'actionName': 'deleteBranch',
'authPass': 'admin',
'authUser': 'admin@company.com',
'branchLabel': 'branches/eva',
'projectId': '1'
}
Specific error codes :
237: A studio is connected to your project's branch
----------------------------------------------------------
Command: deleteEsbTask
----------------------------------------------------------
Description : Delete a Esb execution task in TAC.
- taskId: taskId must exist.
Requires authentication : true
Requires rights : ESB Conductor management
Since : 6.1
Sample :
{
'actionName': 'deleteEsbTask',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: deletePlan
----------------------------------------------------------
Description : Delete a execution plan in TAC.
- planId: planId must exist.
- deleteRelatedData: true to remove all of the related logs and archives.
Requires authentication : true
Requires rights : Job conductor author
Since : 5.6
Sample :
{
'actionName': 'deletePlan',
'authPass': 'admin',
'authUser': 'admin@company.com',
'deleteAllRelatedData': true,
'planId': '7'
}
----------------------------------------------------------
Command: deleteProject
----------------------------------------------------------
Description : Delete a project.
- deleteContentsInRepository : [Since 7.0, Optional]. default is 'false'
Requires authentication : true
Requires rights : Project management
Since : 3.2
Sample :
{
'actionName': 'deleteProject',
'authPass': 'admin',
'authUser': 'admin@company.com',
'deleteContentsInRepository': false,
'projectName': 'project1'
}
----------------------------------------------------------
Command: deleteProjectReference
----------------------------------------------------------
Description : Delete project references for the specified project and branch(referenceProjects should use technical label)
Requires authentication : true
Requires rights : Project references management
Since : 5.6
Sample :
{
'actionName': 'deleteProjectReference',
'authPass': 'admin',
'authUser': 'admin@company.com',
'branch': 'trunk',
'projectName': 'project1',
'referenceProjects': 'Q1/trunk,Q2/branches/branch1,Q3/tags/tag1'
}
----------------------------------------------------------
Command: deleteTask
----------------------------------------------------------
Description : Delete a new execution task in TAC.
- taskId: taskId must exist.
- deleteRelatedData: true to remove all of the related logs and archives.
Requires authentication : true
Requires rights : Job conductor author
Since : 5.4
Sample :
{
'actionName': 'deleteTask',
'authPass': 'admin',
'authUser': 'admin@company.com',
'deleteAllRelatedData': true,
'taskId': '7'
}
Specific error codes :
5: No task with this taskId
230: Task is processing during deletion
----------------------------------------------------------
Command: deleteTaskParam
----------------------------------------------------------
Description : Delete the jvm parameter of task.
- id: id of the jvm parameter to be deleted.
Requires authentication : true
Requires rights : Job conductor author
Since : 7.2
Sample :
{
'actionName': 'deleteTaskParam',
'authPass': 'admin',
'authUser': 'admin@company.com',
'id': 1
}
----------------------------------------------------------
Command: deleteTrigger
----------------------------------------------------------
Description : Delete a trigger
Requires authentication : true
Requires rights : Job conductor create trigger
Since : 5.6
Sample :
{
'actionName': 'deleteTrigger',
'authPass': 'admin',
'authUser': 'admin@company.com',
'id': '1'
}
----------------------------------------------------------
Command: deleteUser
----------------------------------------------------------
Description : Delete one user
Requires authentication : true
Requires rights : User management
Since : 3.2
Sample :
{
'actionName': 'deleteUser',
'authPass': 'admin',
'authUser': 'admin@company.com',
'userLogin': 'john.smith@company.com'
}
Specific error codes :
92: Database error while deleting User.
93: The user is the last administrator, he can't be removed.
----------------------------------------------------------
Command: deleteUserGroupById
----------------------------------------------------------
Description : delete user group by provided id.
- 'id' : group id
Requires authentication : true
Requires rights : User management
Since : 6.5
Sample :
{
'actionName': 'deleteUserGroupById',
'authPass': 'admin',
'authUser': 'admin@company.com',
'id': 1
}
----------------------------------------------------------
Command: enablePersonalAccessToken
----------------------------------------------------------
Description : Enable the personal access token feature for all users
Requires authentication : true
Requires rights : Security config management
Since : 7.3
Sample :
{
'actionName': 'enablePersonalAccessToken',
'authPass': 'admin',
'authUser': 'admin@company.com',
'enable': true
}
Specific error code :
7: Insufficient right. You must have one of the roles [Security Administrator, Administrative Use] for action [enablePersonalAccessToken].
----------------------------------------------------------
Command: enableSandboxProject
----------------------------------------------------------
Description : Tells if Sandbox project feature is enabled in configuration.
Requires authentication : false
Since : 4.2
Sample :
{'actionName': 'enableSandboxProject'}
----------------------------------------------------------
Command: fixBrokenRelations
----------------------------------------------------------
Description : Tools to fix relations: user-usergroup, project authorizations
Requires authentication : true
Requires rights : User management
Since : 6.2
Sample :
{
'actionName': 'fixBrokenRelations',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: generatePersonalAccessToken
----------------------------------------------------------
Description : Generate your personal access token
Requires authentication : true
Requires rights : Any
Since : 7.3
Sample :
{
'actionName': 'generatePersonalAccessToken',
'authPass': 'test',
'authUser': 'john.smith@company.com'
}
Specific error code :
102: Personal Access Token is disabled, please contact your Security Administrator.
----------------------------------------------------------
Command: getArtifactLocation
----------------------------------------------------------
Description : Get the Nexus/Nexus3/Artifactory artifact location informations
Requires authentication : true
Requires rights : Configuration visualization
Since : 6.4
Sample :
{
'actionName': 'getArtifactLocation',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
Specific error codes :
172: The artifact type is illegal..
----------------------------------------------------------
Command: getEsbTaskIdByName
----------------------------------------------------------
Description : Get esb task id by given taskName
Requires authentication : true
Requires rights : ESB Conductor visualization
Since : 6.1
Sample :
{
'actionName': 'getEsbTaskIdByName',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskName': 'task1'
}
----------------------------------------------------------
Command: getEsbTaskNameById
----------------------------------------------------------
Description : Get esb task name by given id
Requires authentication : true
Requires rights : ESB Conductor visualization
Since : 6.1
Sample :
{
'actionName': 'getEsbTaskNameById',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: getEsbTaskStatus
----------------------------------------------------------
Description : Return the statuses of a specific esb task.
Requires authentication : true
Requires rights : ESB Conductor visualization
Since : 6.1
Sample :
{
'actionName': 'getEsbTaskStatus',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: getExecutionPlanById
----------------------------------------------------------
Description : Return the execution plan and tasks related defined in the execution plan by id
Requires authentication : true
Requires rights : Execution plan view
Since : 8.0
Sample :
{
'actionName': 'getExecutionPlanById',
'authPass': 'admin',
'authUser': 'security@company.com',
'planId': 114
}
----------------------------------------------------------
Command: getExecutionTaskById
----------------------------------------------------------
Description : Return the task defined in the jobconductor by id
Requires authentication : true
Requires rights : Job conductor view
Since : 8.0
Sample :
{
'actionName': 'getExecutionTaskById',
'authPass': 'admin',
'authUser': 'security@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: getIdByUserGroupName
----------------------------------------------------------
Description : retrieve user group Id by user group label
- 'label' : user group label
Requires authentication : true
Requires rights : User management
Since : 6.5
Sample :
{
'actionName': 'getIdByUserGroupName',
'authPass': 'admin',
'authUser': 'admin@company.com',
'label': 'Test Group'
}
----------------------------------------------------------
Command: getJobServerStatus
----------------------------------------------------------
Description : retrieve the number of running Jobs on the JobServer
Requires authentication : true
Requires rights : Job conductor view
Since : 8.0
Sample :
{
'actionName': 'getJobServerStatus',
'authPass': 'admin',
'authUser': 'security@company.com'
}
----------------------------------------------------------
Command: getLibLocation
----------------------------------------------------------
Description : Get the Nexus lib location infomations
Requires authentication : true
Requires rights : Configuration visualization
Since : 5.4
Sample :
{
'actionName': 'getLibLocation',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: getLicenseKey
----------------------------------------------------------
Description : Get license key and customer name.
- 'projectName': [Optional. Since 6.4.0] If you want to get license by project name, you have to provide this parameter.
Requires authentication : true
Since : 5.2
Sample :
{
'actionName': 'getLicenseKey',
'authPass': 'admin',
'authUser': 'admin@company.com',
'projectName': 'project1'
}
----------------------------------------------------------
Command: getNameByTaskId
----------------------------------------------------------
Description : Get task name by given id
Requires authentication : true
Requires rights : Job conductor view
Since : 5.1
Sample :
{
'actionName': 'getNameByTaskId',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: getPlanExecutionStatus
----------------------------------------------------------
Description : Return the statuses of a specific plan execution. Specify as parameter the response value 'execRequestId' returned previously by the command 'runPlan'.
Requires authentication : true
Requires rights : Job conductor view
Since : 8.0
Sample :
{
'actionName': 'getPlanExecutionStatus',
'authPass': 'admin',
'authUser': 'admin@company.com',
'execRequestId': '1406705428611_7swji'
}
----------------------------------------------------------
Command: getProjectById
----------------------------------------------------------
Description : return the project defined in the projects by id
Requires authentication : true
Requires rights : Projects read
Since : 8.0
Sample :
{
'actionName': 'getProjectById',
'authPass': 'admin',
'authUser': 'security@company.com',
'withReference': 'false'
'projectId': '1'
}
----------------------------------------------------------
Command: getTaskExecutionStatus
----------------------------------------------------------
Description : Return the statuses of a specific task execution. Specify as parameter the response value 'execRequestId' returned previously by the command 'runTask'. The returned object contains the key 'exitCode' only if the job is ended.
Requires authentication : true
Requires rights : Job conductor view
Since : 5.6
Sample :
{
'actionName': 'getTaskExecutionStatus',
'authPass': 'admin',
'authUser': 'admin@company.com',
'execRequestId': '1406705428611_7swji'
}
----------------------------------------------------------
Command: getTaskIdByName
----------------------------------------------------------
Description : Get task id by given taskName
Requires authentication : true
Requires rights : Job conductor view
Since : 5.1
Sample :
{
'actionName': 'getTaskIdByName',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskName': 'task1'
}
----------------------------------------------------------
Command: getTaskStatus
----------------------------------------------------------
Description : Return the statuses of a specific task.
Requires authentication : true
Requires rights : Job conductor view
Since : 4.2
Sample :
{
'actionName': 'getTaskStatus',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: getTasksRelatedToJobs
----------------------------------------------------------
Description : Return the complete list of tasks defined in the jobconductor
Requires authentication : true
Requires rights : Job conductor view
Since : 5.0
Sample :
{
'actionName': 'getTasksRelatedToJobs',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: getUpdateRepositoryUrl
----------------------------------------------------------
Description : Returns Artifact repository connection information
Requires authentication : true
Since : 5.0
Sample :
{
'actionName': 'getUpdateRepositoryUrl',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
Specific error codes :
42: Artifact repository url is not setup
----------------------------------------------------------
Command: getUserInfo
----------------------------------------------------------
Description : Return user information
Requires authentication : true
Requires rights : User visualization
Since : 6.4
Sample :
{
'actionName': 'getUserInfo',
'authPass': 'admin',
'authUser': 'admin@company.com',
'userLogin': 'john.smith@company.com'
}
----------------------------------------------------------
Command: help
----------------------------------------------------------
Description : Displays the help
- commandName is optional: <all> will print all the commands,<any command> will print the detailed info of this command
Requires authentication : false
Since : 5.2
Sample :
{
'actionName': 'help',
'commandName': 'help'
}
----------------------------------------------------------
Command: importExecutionPlan
----------------------------------------------------------
Description : Import the complete list of execution plans and tasks related defined in the execution plan to DB
- ExecutionPlan main info: label, desc, execPlanTimeout, execPlanRollBack(task name), pauseOnError
- ExecutionPlan nodes:
Root Node: partType(NONE) other params - useParalle:false -> Single Node; true -> Parallel node.
Single Node (useParalle=false): partType(ON_OK/ON_ERROR/AFTER), planpartTaskId(taskName)
Parallel Node (useParalle=true): partType(ON_OK/ON_ERROR/AFTER), maxThread, it has the parallel childParts node which partType(PARALLEL)
Other params:
childParts: the child parallel nodes for Parallel Node and the next node
planPrms: plan main info, array with planPrmName planPrmValue
partJobPrms: part node(useParalle=false, which means it has the task configured on the node),
array with name, itemType, override, partCustomerValue(extends from plan context), customerValue(new context for this node), partCustomerValue and customerValue works with override = true
Requires authentication : true
Requires rights : Job conductor author
Since : 5.4
Sample :
{
'actionName': 'importExecutionPlan',
'authPass': 'admin',
'authUser': 'admin@company.com',
'result': {'ExecutionPlan': [{
'desc': 'aaa',
'execPlanRollBack': 'test1',
'execPlanTimeOut': '1000',
'label': 'plan0012',
'pauseOnError': 'true',
'planParts': {
'childParts': [
{
'partType': 'PARALLEL',
'planPartTaskId': 'test12'
},
{
'partJobPrms': [
{
'itemType': 'id_String',
'name': 'username',
'override': 'true',
'partCustomerValue': 'account_plan'
},
{
'customerValue': 'admin123',
'itemType': 'id_Password',
'name': 'password',
'override': 'true'
},
{
'itemType': 'id_Integer',
'name': 'age',
'override': 'false'
}
],
'partType': 'PARALLEL',
'planPartTaskId': 'test1'
},
{
'childParts': [{
'partType': 'AFTER',
'planPartTaskId': 'test12'
}],
'partType': 'ON_OK',
'planPartTaskId': 'test12'
}
],
'maxThread': 1,
'partType': 'NONE',
'useParalle': 'true'
},
'planPrms': [{
'planPrmName': 'account_plan',
'planPrmValue': 'plan123'
}]
}]}
}
Specific error codes :
223: Task not exist in the DB.
224: Error appears when parsing the date.
----------------------------------------------------------
Command: listEsbTasks
----------------------------------------------------------
Description : Return the complete list of esb tasks defined in the esb conductor
Requires authentication : true
Requires rights : ESB Conductor visualization
Since : 5.4
Sample :
{
'actionName': 'listEsbTasks',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: listExecutionPlans
----------------------------------------------------------
Description : Return the complete list of execution plans and tasks related defined in the execution plan
Requires authentication : true
Requires rights : Job conductor view
Since : 5.4
Sample :
{
'actionName': 'listExecutionPlans',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: listLicenses
----------------------------------------------------------
Description : Get information about active licenses.
Requires authentication : true
Requires rights : License management
Since : 7.1
Sample :
{
'actionName': 'listLicenses',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: listLocks
----------------------------------------------------------
Description : Returns all locked items for the specified project and branch
Requires authentication : false
Requires rights : Lock visualization
Since : 4.2
Sample :
{
'actionName': 'listLocks',
'branch': 'trunk',
'projectName': 'project1'
}
----------------------------------------------------------
Command: listProjects
----------------------------------------------------------
Description : Returns list of all projects
Requires authentication : true
Requires rights : Project visualization
Since : 5.4
Sample :
{
'actionName': 'listProjects',
'authPass': 'admin',
'authUser': 'admin@company.com',
'onlyActive': true,
'onlyGit': false,
'withReference': false
}
----------------------------------------------------------
Command: listServer
----------------------------------------------------------
Description : List all servers in tac.
Requires authentication : true
Requires rights : Server visualization
Since : 5.4
Sample :
{
'actionName': 'listServer',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: listTaskParams
----------------------------------------------------------
Description : List of the jvm parameter of the task by task id or uniqueId.
- uniqueId: the unique id of the task jvm param be added. The uniqueId or taskId must be provided.
- taskId: the task id of the task jvm param be added. The uniqueId or taskId must be provided.
Requires authentication : true
Requires rights : Job conductor view
Since : 7.2
Sample :
{
'actionName': 'listTaskParams',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1,
'uniqueId': 'edb73b78-043e-442a-beb4-838d355b56b9'
}
----------------------------------------------------------
Command: listTasks
----------------------------------------------------------
Description : Return the complete list of tasks defined in the jobconductor
Requires authentication : true
Requires rights : Job conductor view
Since : 5.2
Sample :
{
'actionName': 'listTasks',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: listTrigger
----------------------------------------------------------
Description : List all trigger.
-taskId: if the taskId not provided, it list all the triggers; if it is provided, it list all triggers related to the taskId
Requires authentication : true
Requires rights : Job conductor view
Since : 5.6
Sample :
{
'actionName': 'listTrigger',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': '1'
}
----------------------------------------------------------
Command: listUserGroups
----------------------------------------------------------
Description : List all user groups
Requires authentication : true
Requires rights : User management
Since : 6.2
Sample :
{
'actionName': 'listUserGroups',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: listUsers
----------------------------------------------------------
Description : Returns list of users of the specified type. If type is not specified, returns all users.
- 'type' : DI/DQ/MDM/DP/TDS/MDMWeb/DQDict .
- 'tdsRole/mdmRole' : only list as specific role.
- 'active' : [true|false], not specified by default. When specified, only list active|non-active users.
Requires authentication : true
Requires rights : User visualization
Since : 5.3
Sample :
{
'actionName': 'listUsers',
'authPass': 'admin',
'authUser': 'admin@company.com',
'type': 'MDM'
}
----------------------------------------------------------
Command: listVirtualServers
----------------------------------------------------------
Description : List all virtual servers
Requires authentication : true
Requires rights : Server visualization
Since : 5.6
Sample :
{
'actionName': 'listVirtualServers',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: logoutUser
----------------------------------------------------------
Description : Force log off single or multiple users, use list of uniqueID or userID
Requires authentication : true
Requires rights : User management
Since : 7.2
Sample :
{
'actionName': 'logoutUser',
'authPass': 'admin',
'authUser': 'admin@company.com',
'uniqueId': [
'2ba4fef5-98af-4cbe-a645-0a63cd498110',
'bcb33b09-2575-4163-bd44-1dc9567283b5'
],
'userId': [
0,
1,
2
]
}
----------------------------------------------------------
Command: migrateDatabase
----------------------------------------------------------
Description : Database migration.
- 'skipBackup' is optional, when set to true, be sure your database has been backed up.
Requires authentication : false
Since : 5.6
Sample :
{'Samples': [
{
'actionName': 'migrateDatabase',
'dbConfigPassword': 'admin',
'mode': 'synchronous',
'skipBackup': false,
'sourcePasswd': 'dbPassword',
'sourceUrl': 'jdbc:mysql://127.0.0.1:3306/tac',
'sourceUser': 'dbUser'
},
{
'actionName': 'migrateDatabase',
'dbConfigPassword': 'admin',
'mode': 'synchronous',
'sourcePasswd': 'srcPassword',
'sourceUrl': 'jdbc:mysql://127.0.0.1:3306/tac',
'sourceUser': 'srcUser',
'targetPasswd': 'tagPassword',
'targetUrl': 'jdbc:oracle:thin:@192.168.31.110:1521:orcl',
'targetUser': 'tagUser'
}
]}
----------------------------------------------------------
Command: migrateFromSvnToGit
----------------------------------------------------------
Description: Migrate all Projects from SVN to Git repository, meanwhile, update projects table in the database. Change the storage URL from SVN to Git.
- 'doMigration' : [true|false] false indicates that migration operation should be skipped, vise versa, default is true. 'doMigration' is optional
- When 'doMigration' is false, params 'svnLocation', 'svnLogin' and 'svnPassword' are not required
- When using 'gitLocation', then 'gitLogin' and 'gitPassword' must be provided
- params 'gitCommitMode', 'gitLockMode' and 'gitUserLog' is optional
- 'gitCommitMode' : [AUTO|SEMI] AUTO for 'Automatic', SEMI for 'Unlocked Items', default value is AUTO
- 'gitLockMode' : [AUTO|ASK|MANUAL] AUTO for 'Automatic', ASK for 'Ask user', MANUAL for 'Manual', default value is AUTO
- 'gitUserLog' :[true|false], default value is false
- Notice : Git options supported since 8.1
Requires authentication : true
Requires rights : Project management
Since : 3.2
Sample :
{
"actionName": "migrateFromSvnToGit",
"addTechNameAtURL": true,
"authPass": "admin",
"authUser": "admin@company.com",
"doMigration": true,
"gitLocation": "http://localhost:3000/git/git-repo.git",
"gitLogin": "admin",
"gitPassword": "xxxxx",
"svnLocation": "svn://localhost/svn-repo",
"svnLogin": "admin",
"svnPassword": "xxxxx"
}
----------------------------------------------------------
Command: pausePlan
----------------------------------------------------------
Description : Pause all the triggers of a specified execution plan.
Requires authentication : true
Requires rights : Job conductor execute
Since : 7.1
Sample :
{
'actionName': 'pausePlan',
'authPass': 'admin',
'authUser': 'admin@company.com',
'planId': 1
}
----------------------------------------------------------
Command: pauseTask
----------------------------------------------------------
Description : Pause all the triggers of a specified task.
Requires authentication : true
Requires rights : Job conductor execute
Since : 5.1
Sample :
{
'actionName': 'pauseTask',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: projectExist
----------------------------------------------------------
Description : Returns true if the project exist.
Requires authentication : true
Requires rights : Project visualization
Since : 4.1
Sample :
{
'actionName': 'projectExist',
'authPass': 'admin',
'authUser': 'admin@company.com',
'projectName': 'project1'
}
----------------------------------------------------------
Command: removeLocks
----------------------------------------------------------
Description : Allow to unlock a repository item. Mainly used by the Studio.
Requires authentication : false
Requires rights : Lock management
Since : 4.2
Sample :
{
'actionName': 'removeLocks',
'applicationName': 'studio',
'authUser': 'john.smith@company.com',
'branch': 'trunk',
'locks': [{
'itemId': '_AMyZYFcAEeCQ34gn79PTjQ',
'itemLabel': 'BM2',
'itemType': 'repository.businessProcess'
}],
'projectName': 'project1'
}
----------------------------------------------------------
Command: removeServer
----------------------------------------------------------
Description : Remove an execution server.
Requires authentication : true
Requires rights : Server management
Since : 4.2
Sample :
{
'actionName': 'removeServer',
'authPass': 'admin',
'authUser': 'admin@company.com',
'serverId': 101
}
----------------------------------------------------------
Command: removeServerProjectAuthorization
----------------------------------------------------------
Description : Remove server authorization to a project.
- application will retrive job server if argument'isVirtualServer' is omitted
Requires authentication : true
Requires rights : Server management
Since : 6.1
Sample :
{
'actionName': 'removeServerProjectAuthorization',
'authPass': 'admin',
'authUser': 'admin@company.com',
'isVirtualServer': false,
'projectName': 'projectA',
'serverName': 'jobServerA'
}
----------------------------------------------------------
Command: removeServersFromVirtualServer
----------------------------------------------------------
Description : Remove servers from a virtual Server
Requires authentication : true
Requires rights : Server management
Since : 5.6
Sample :
{
'actionName': 'removeServersFromVirtualServer',
'authPass': 'admin',
'authUser': 'admin@company.com',
'servers': [
{'serverId': '1'},
{'serverId': '2'}
],
'virtualServerId': '1'
}
----------------------------------------------------------
Command: removeUsersFromUserGroup
----------------------------------------------------------
Description : Remove Users from a User Group
Requires authentication : true
Requires rights : User management
Since : 6.2
Sample :
{
'actionName': 'removeUsersFromUserGroup',
'authPass': 'admin',
'authUser': 'admin@company.com',
'id': '1',
'users': [
{'id': '10'},
{'id': '21'}
]
}
----------------------------------------------------------
Command: removeVirtualServer
----------------------------------------------------------
Description : remove virtual execution server
Requires authentication : true
Requires rights : Server management
Since : 5.6
Sample :
{
'actionName': 'removeVirtualServer',
'authPass': 'admin',
'authUser': 'admin@company.com',
'id': '1'
}
----------------------------------------------------------
Command: requestDeploy
----------------------------------------------------------
Description : Deploy the job linked to the task given in parameter.
Requires authentication : true
Requires rights : Job conductor execute
Since : 5.0
Sample :
{
'actionName': 'requestDeploy',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
Specific error codes :
170: Error while deploying the task
----------------------------------------------------------
Command: requestDeployEsbTask
----------------------------------------------------------
Description : Deploy the job linked to the esb task given in parameter.
Requires authentication : true
Requires rights : ESB Conductor management
Since : 6.1
Sample :
{
'actionName': 'requestDeployEsbTask',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: requestPauseTriggers
----------------------------------------------------------
Description : Request to pause the trigger(s) of a task.
Requires authentication : true
Requires rights : Job conductor create trigger
Since : 5.0
Sample :
{
'actionName': 'requestPauseTriggers',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1,
'triggerId': 1
}
----------------------------------------------------------
Command: requestResumeTriggers
----------------------------------------------------------
Description : Request to resume the trigger(s) of a task.
Requires authentication : true
Requires rights : Job conductor create trigger
Since : 5.0
Sample :
{
'actionName': 'requestResumeTriggers',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1,
'triggerId': 1
}
----------------------------------------------------------
Command: requestUndeployEsbTask
----------------------------------------------------------
Description : Undeploy the job linked to the esb task given in parameter.
Requires authentication : true
Requires rights : ESB Conductor management
Since : 6.1
Sample :
{
'actionName': 'requestUndeployEsbTask',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: resetPassword
----------------------------------------------------------
Description : Send a reset password link to the user login email address.
Requires authentication : false
Since : 6.2
Sample :
{
'actionName': 'resetPassword',
'userLogin': 'john.smith@company.com'
}
----------------------------------------------------------
Command: resumePlan
----------------------------------------------------------
Description : Resume all the triggers of a specified execution plan.
Requires authentication : true
Requires rights : Job conductor execute
Since : 7.1
Sample :
{
'actionName': 'resumePlan',
'authPass': 'admin',
'authUser': 'admin@company.com',
'planId': 1
}
----------------------------------------------------------
Command: revokeLicenseKeyByValue
----------------------------------------------------------
Description : revoke license for Talend Administration Center from RM
Requires authentication : true
Requires rights : License management
Since : 6.0
Sample :
{
'actionName': 'revokeLicenseKeyByValue',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: revokePersonalAccessToken
----------------------------------------------------------
Description : Revoke your personal access token
Requires authentication : true
Requires rights : Any
Since : 7.3
Sample :
{
'actionName': 'revokePersonalAccessToken',
'authPass': 'test',
'authUser': 'john.smith@company.com',
}
Specific error code :
102: Personal Access Token is disabled, please contact your Security Administrator.
----------------------------------------------------------
Command: revokePersonalAccessTokenOfUser
----------------------------------------------------------
Description : Revoke personal access token of a specific user
Requires authentication : true
Requires rights : User management
Since : 7.3
Sample :
{
'actionName': 'revokePersonalAccessTokenOfUser',
'authPass': 'admin',
'authUser': 'admin@company.com',
'userLogin': 'john.smith@company.com'
}
Specific error code :
7: Insufficient right. You must have one of the roles [Security Administrator, Administrative Use] for action [revokePersonalAccessTokenOfUser].
102: Personal Access Token is disabled, please contact your Security Administrator.
----------------------------------------------------------
Command: runPlan
----------------------------------------------------------
Description : Allow to run defined plan. Parameter 'queueIfNecessary' - optional, and set false if not provided.
Requires authentication : true
Requires rights : Job conductor execute
Since : 6.4
Sample :
{
'actionName': 'runPlan',
'authPass': 'admin',
'authUser': 'admin@company.com',
'planId': '1',
'queueIfNecessary': 'false'
}
Specific error codes :
241: Error occurred while running the plan
----------------------------------------------------------
Command: runPlanFromNode
----------------------------------------------------------
Description : Allow to run a plan from a defined plan part node
Requires authentication : true
Requires rights : Job conductor execute
Since : 5.6
Sample :
{
'actionName': 'runPlanFromNode',
'authPass': 'admin',
'authUser': 'admin@company.com',
'planId': '1',
'planPartId': 5
}
Specific error codes :
240: Error occurred while running the plan from plan part
----------------------------------------------------------
Command: runTask
----------------------------------------------------------
Description : Allows to run a task defined in Job conductor by its uniqueId/id. Mode can be 'asynchronous' or 'synchronous'
- context: [optional], custom context values, a json string value.
- uniqueId: [optional], uniqueId for task, primary identity for task, secondary is 'id'.
Requires authentication : true
Requires rights : Job conductor execute
Since : 4.2
Sample :
{
'actionName': 'runTask',
'authPass': 'admin',
'authUser': 'admin@company.com',
'context': {'name': 'Jim'},
'jvmParams': [
'-Xmx256m',
'-Xms64m'
],
'mode': 'synchronous',
'taskId': 1,
'uniqueId': '3c79e760-7815-49ef-98e5-857104ff82bc'
}
Specific error codes :
30: Error while launching task
31: Thread interupted while running
32: No right to run this task
33: The parameter 'mode' must have the value 'synchronous' or 'asynchronous'
----------------------------------------------------------
Command: saveEsbTask
----------------------------------------------------------
Description : Add a new esb execution task in TAC and return the task ID.
- featureType: could be [ROUTE, SERVICE, GENERIC].
- runtimeContext: 'Default' is the default value.
- context: [optional], custom context values, a json string value.
Requires authentication : true
Requires rights : ESB Conductor management
Since : 5.4
Sample :
{
'actionName': 'saveEsbTask',
'authPass': 'admin',
'authUser': 'admin@company.com',
'description': 'esbTask1's description',
'featureName': 'DemoRESTConsumer-feature',
'featureType': 'ROUTE',
'featureUrl': 'mvn:org.example/DemoRESTConsumer-feature/0.1.0-SNAPSHOT/xml',
'featureVersion': '0.1.0-SNAPSHOT',
'repository': 'repo-snapshot',
'runtimeContext': 'Default',
'runtimePropertyId': 'DemoRESTConsumer',
'runtimeServerName': 'serv1',
'context': {'name': 'Jim'},
'tag': 'tag1',
'taskName': 'esbTask1'
}
----------------------------------------------------------
Command: setLicenseKey
----------------------------------------------------------
Description : Set a new license for Talend Administration Center
Requires authentication : true
Requires rights : License management
Since : 5.2
Sample :
{
'actionName': 'setLicenseKey',
'authPass': 'admin',
'authUser': 'admin@company.com',
'licenseKeyPath': 'c:/temp/TDQ_EE.license'
}
Specific error codes :
110: license is not file or not exist
111: license file operation failed
----------------------------------------------------------
Command: setLicenseKeyByValue
----------------------------------------------------------
Description : set license for Talend Administration Center from RM
Requires authentication : true
Requires rights : License management
Since : 6.0
Sample :
{
'actionName': 'setLicenseKeyByValue',
'authPass': 'admin',
'authUser': 'admin@company.com'
}
----------------------------------------------------------
Command: setRoleLimitation
----------------------------------------------------------
Description : Remove or add module's right restriction to a role.
- userRole: must be one of those values [SECURITY_ADMIN_ROLE, ADMIN_ROLE, DESIGNER_ROLE, OPERATION_MANAGER_ROLE, AUDITOR_ROLE, VIEWER_ROLE, ADMINISTRATIVE_USE_ROLE, CUSTOM_ROLE_1, CUSTOM_ROLE_2, CUSTOM_ROLE_3, CUSTOM_ROLE_4, CUSTOM_ROLE_5, CUSTOM_ROLE_6, CUSTOM_ROLE_7, CUSTOM_ROLE_8, CUSTOM_ROLE_9, CUSTOM_ROLE_10]
- rightKey: must be one of those values [LICENSE, CONFIG_MANAGMENT, CONFIG_READ, SECURITY_CONFIG_MANAGMENT, SECURITY_CONFIG_READ, USERS_MANAGMENT, USERS_READ, PROJECTS_MANAGMENT, PROJECTS_READ, LOCK_MANAGMENT, LOCK_READ, SERVERS_MANAGMENT, SERVERS_READ, JOB_CONDUCTOR_AUTHOR, JOB_CONDUCTOR_EXECUTE, JOB_CONDUCTOR_CREATE_TRIGGER, JOB_CONDUCTOR_VIEW, AUDIT_LOG_MANAGEMENT, DASH_JOBS, STUDIO, STUDIO_ALL_READ, STUDIO_READ_MAX, NOTIFICATIONS_MANAGMENT, SOFTWAREUPDATE, TAGS_CREATION, ESB_CONDUCTOR_READ, ESB_CONDUCTOR_MGT, ESB_SL_READ, ESB_SL_MGT, ESB_SAM_READ, ESB_AUTH_READ, ESB_AUTH_MGT, ESB_SR_READ, ESB_SR_MGT, ESB_PROVI_READ, ESB_PROVI_MGT, CONFIG_RIGHTS_READ, CONFIG_RIGHTS_MGT, PROJECT_REFERENCES_MGT]
- limitation: true if a restriction must applied, false otherwise.
Requires authentication : true
Requires rights : Security configuration management
Since : 5.3
Sample :
{
'actionName': 'setRoleLimitation',
'authPass': 'admin',
'authUser': 'admin@company.com',
'limitation': true,
'rightKey': 'SERVERS_READ',
'userRole': 'DESIGNER_ROLE'
}
----------------------------------------------------------
Command: startEsbTask
----------------------------------------------------------
Description : Start the execution of a given esb task
Requires authentication : true
Requires rights : ESB Conductor management
Since : 6.1
Sample :
{
'actionName': 'startEsbTask',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: stopEsbTask
----------------------------------------------------------
Description : Stop the execution of a given esb task
Requires authentication : true
Requires rights : ESB Conductor management
Since : 6.1
Sample :
{
'actionName': 'stopEsbTask',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: stopTask
----------------------------------------------------------
Description : Stop the execution of a given task
Requires authentication : true
Requires rights : Job conductor execute
Since : 5.1
Sample :
{
'actionName': 'stopTask',
'authPass': 'admin',
'authUser': 'admin@company.com',
'taskId': 1
}
----------------------------------------------------------
Command: taskLog
----------------------------------------------------------
Description : Retrieve the logs of the specified task
- lastExecution: true/false(default). Get the lastest execution log or not.
- execRequestId: 'execRequestId' returned by runTask. Get the specific execution log. If this parameter is specified, parameter 'startTime', 'endTime' and 'lastExecution' will be ignored
Requires authentication : true
Requires rights : Job conductor view
Since : 5.1
Sample :
{
'actionName': 'taskLog',
'authPass': 'admin',
'authUser': 'admin@company.com',
'endTime': '\'2016-03-24 13:00:00\'',
'lastExecution': false,
'startTime': '\'2016-03-24 12:00:00\'',
'taskId': 1
}
Specific error codes :
220: Error happened when reading logs.
225: Error happened when date range is illegal.
226: Error appears when parsing the date.
227: Invalid execRequestId.
228: Error: execRequestId doesn't match taskId.
----------------------------------------------------------
Command: updateEsbTask
----------------------------------------------------------
Description : Update and existing esb execution task in TAC and return the task ID.
- featureType: could be [ROUTE, SERVICE, GENERIC].
- runtimeContext: 'Default' is the default value.
- context: [optional], custom context values, a json string value.
Requires authentication : true
Requires rights : ESB Conductor management
Since : 6.1
Sample :
{
'actionName': 'updateEsbTask',
'authPass': 'admin',
'authUser': 'admin@company.com',
'description': 'esbTask1's description',
'featureName': 'DemoRESTConsumer-feature',
'featureType': 'ROUTE',
'featureUrl': 'mvn:org.example/DemoRESTConsumer-feature/0.1.0-SNAPSHOT/xml',
'featureVersion': '0.1.0-SNAPSHOT',
'repository': 'repo-snapshot',
'runtimeContext': 'Default',
'runtimePropertyId': 'DemoRESTConsumer',
'runtimeServerName': 'serv1',
'context': {'name': 'Jim'},
'tag': 'tag1',
'taskId': 1,
'taskName': 'esbTask1'
}
----------------------------------------------------------
Command: updateProject
----------------------------------------------------------
Description : Update a project based on id.
- 'gitCommitMode' : [AUTO|SEMI] AUTO for 'Automatic', SEMI for 'Unlocked Items'
- 'gitLockMode' : [AUTO|ASK|MANUAL] AUTO for 'Automatic', ASK for 'Ask user', MANUAL for 'Manual'
- Notice : Git options supported since 6.1.
- Project reference feature is deprecated since 6.5, here only can set reference false.
Requires authentication : true
Requires rights : Project management
Since : 5.6
Sample :
{
'actionName': 'updateProject',
'active': 'true',
'authPass': 'admin',
'authUser': 'admin@company.com',
'description': 'project description',
'gitCommitMode': 'SEMI',
'gitLockMode': 'ASK',
'gitLogin': 'root',
'gitPassword': 'root',
'gitUserLog': 'true',
'id': '1',
'projectGitLocation': 'https://localhost/giteqoxywa6.git',
'reference': 'false'
}
----------------------------------------------------------
Command: updateServer
----------------------------------------------------------
Description : Update a new execution server, parameter username/password (optional) are used for user authentication to access the JobServer,
- For update server type Runtime, you must provide the 'isTalendRunTime': true or false to enable or disable runtime update.
- For 'timezone' property, refer to http://joda-time.sourceforge.net/timezones.html for more details on the syntax
Requires authentication : true
Requires rights : Server management
Since : 5.6
Sample :
{
'actionName': 'updateServer',
'adminConsolePort': 8040,
'authPass': 'admin',
'authUser': 'admin@company.com',
'commandPort': 8000,
'description': 'Talend Runtime server in production',
'filePort': 8001,
'host': 'localhost',
'instance': 'trun',
'isTalendRunTime': 'true',
'label': 'serverName1',
'mgmtRegPort': 1099,
'mgmtServerPort': 44444,
'monitoringPort': 8888,
'password': 111111,
'processMessagePort': 8555,
'runtimePassword': 'password',
'runtimeUsername': 'name',
'timeoutUnknownState': '120',
'timezoneId': 'US/Hawaii',
'useHttpsForAdminConsole': true,
'useSSL': true,
'username': 'test@company.com'
}
----------------------------------------------------------
Command: updateTask
----------------------------------------------------------
Description : Allows to update an existing execution task from TAC.
- onUnknownStateJob: could be [WAIT, KILL_TASK, RESTART_TASK, RECOVER_TASK]
- contextName: 'Default' is the default value for it;
- context: can customize value and make it enabled for context.
- contextParamsRefresh: [true|false] reload the newest artifact's context and saved it in the database when updating the task if set to true. default value is true.
- targetConductor: could be [JOBCONDUCTOR, BIGDATA_STREAMING]. 'JOBCONDUCTOR' is the default value.
- nexusRepository: [Since 6.2] if update task from Nexus, using parameters: nexusRepository/nexusGroupId/nexusArtifactId/nexusVersion[/nexusJobVersionSuffix] like 'AssociatePreGeneratedJob' command.
- nexusJobVersionSuffix: [Optional. Since 6.4] use it when job in nexus with named like test-1.0.0-20170516.043751-1.zip
- Notice: [Since 6.2] As this command is for File/Nexus: decide which one by parameter ( filePath > nexusRepository > ... ) exists or not.
- artifactoryRepository: [Since 7.1] if create task from Artifactory, using parameters: artifactoryRepository/artifactoryGroupId/artifactoryArtifactId/artifactoryVersion[/artifactoryJobVersionSuffix].
- artifactoryJobVersionSuffix: [Optional. Since 7.1] use it when job in Artifactory with named like test-1.0.0-20170516.043751-1.zip
- createContextIfNotExist: [Optional][true|false] 'true' is the default value. If set to 'false', new context parameters are not created and existing ones are overridden if artifact contains context parameters with the same name.
Requires authentication : true
Requires rights : Job conductor author
Since : 5.0
Sample :
{
'actionName': 'updateTask',
'active': true,
'artifactoryArtifactId': 'test',
'artifactoryGroupId': 'org.example',
'artifactoryJobVersionSuffix': '0.2.0-20170516.043751-1',
'artifactoryRepository': 'snapshots',
'artifactoryVersion': '0.2.0-SNAPSHOT',
'authPass': 'admin',
'authUser': 'admin@company.com',
'context': {'name': 'Jim'},
'contextName': 'Default',
'contextParamsRefresh': true,
'description': 'task1 for extracting data from DB1',
'execStatisticsEnabled': false,
'executionServerName': 'serv1',
'filePath': ''/home/talend/generatedJob.zip'',
'logLevel': 'Info',
'nexusArtifactId': 'test',
'nexusGroupId': 'org.example',
'nexusJobVersionSuffix': '1.0.0-20170516.043751-1',
'nexusRepository': 'snapshots',
'nexusVersion': '0.1.0-SNAPSHOT',
'onUnknownStateJob': 'WAIT',
'pauseOnError': false,
'runAsUser': 'OS_User',
'taskId': 1,
'taskName': 'task1',
'timeout': 3600
}
----------------------------------------------------------
Command: updateTaskParam
----------------------------------------------------------
Description : Update existing jvm parameters for the task.
- id: id of the jvm parameter to be updated.
- active: set jvm parameter active or not.
- jvmParam: jvm parameter value to be updated.
- description: [optional] updated description of the jvm parameter.
Requires authentication : true
Requires rights : Job conductor author
Since : 7.2
Sample :
{
'actionName': 'updateTaskParam',
'active': true,
'authPass': 'admin',
'authUser': 'admin@company.com',
'description': 'Updated description.',
'id': 1,
'jvmParam': '-Xmx256m'
}
----------------------------------------------------------
Command: updateTrigger
----------------------------------------------------------
Description : Modify a trigger
- only fields to update are mandatory, field not used in method call will be left as is.
- 'timezoneOption': must be one of those values [JOBSERVER_TIMEZONE, TAC_TIMEZONE, CUSTOM_TIMEZONE]
- if this option is 'CUSTOM_TIMEZONE', the field 'timezoneId' becomes mandatory.
- For 'timezone' property, refer to http://joda-time.sourceforge.net/timezones.html for more details on the syntax
- 'pauseOnError' : if set to true, pause the trigger when the task fail.
Requires authentication : true
Requires rights : Job conductor author
Since : 5.6
Sample :
{'Samples': [
{
'actionName': 'updateTrigger',
'authPass': 'admin',
'authUser': 'admin@company.com',
'description': 'This is a simple trigger',
'endTime': '2016-12-31 23:59:59',
'id': 1,
'label': 'SimpleTrigger1',
'pauseOnError': true,
'repeatCount': 10,
'repeatInterval': 120,
'startTime': '2016-12-31 11:40:16',
'timezone': ''Europe/Paris'',
'timezoneOption': 'CUSTOM_TIMEZONE'
},
{
'actionName': 'updateTrigger',
'authPass': 'admin',
'authUser': 'admin@company.com',
'daysOfMonth': '10',
'description': 'This is a cron trigger',
'hours': '5,10',
'id': 1,
'label': 'CronTrigger1',
'minutes': '1,10',
'months': '*',
'pauseOnError': true,
'timezoneOption': 'JOBSERVER_TIMEZONE',
'years': '2016'
},
{
'actionName': 'updateTrigger',
'authPass': 'admin',
'authUser': 'admin@company.com',
'checkTimeInterval': 120,
'created': true,
'description': 'This is a file trigger',
'executionServerId': 1,
'exist': true,
'fileMask': '*',
'folderPath': '/home/tac',
'id': 1,
'label': 'FileTrigger1',
'modified': false,
'pauseOnError': true
}
]}
----------------------------------------------------------
Command: updateUser
----------------------------------------------------------
Description : Update an existing user by uniqueId.
- 'uniqueId' : [Since 6.5] Unique identifier of the user.
- 'count_policy' : [Since 6.0]. [NAMED|CONCURRENT] NAMED for 'Named users', CONCURRENT for 'Concurrent users', default value is CONCURRENT
- 'userGitLogin/userGitPassword' : [Since 6.1].
- 'userGroup/dataPrep/dataPrepRole' : [Since 6.2].
- 'tds/tdsRole' : [Since 6.3].
- 'mdm/mdmRole' : [Since 6.5].
- 'userDn' : [Since 6.4] Distinguished Name. When LDAP enabled, only allow to create LDAP user.
- 'bigData' : [Since 6.4, Optional].
- 'dqDict/'dqDictRole : [Since 7.1, Optional].
Requires authentication : true
Requires rights : User management
Since : 6.5
Sample :
{
'actionName': 'updateUser',
'active': true,
'authPass': 'admin',
'authUser': 'admin@company.com',
'bigData': true,
'count_policy': 'NAMED',
'dataPrep': true,
'dataPrepRole': [
'Administrator',
'Dataset Manager',
'Data Preparator'
],
'dqDict': true,
'mdm': true,
'mdmRole': [
'System_Admin',
'System_Interactive',
'System_Web'
],
'tds': true,
'tdsRole': [
'Data Steward',
'Campaign Owner'
],
'uniqueId': '345234e-rwer434-wer324-4343rq',
'userFirstName': 'john',
'userGitLogin': 'jsmith',
'userGitPassword': '7ob5iT3c',
'userGroup': [],
'userLastName': 'smith',
'userLogin': 'john.smith@company.com',
'userPassword': 'kkE432',
'userRole': [
'Administrator',
'Designer'
],
'userType': 'DI'
}
Specific error codes :
103: Database error while updating user.
----------------------------------------------------------
Command: updateUserGroup
----------------------------------------------------------
Description : Update a user group. dataPrepRoles is only valid when type is DP. tdsRoles is only valid when type is TDS. mdmRoles is only valid when type is MDM_WEB
- 'label' : [DI_ESB|DQ|MDM|DP|TDS|MDM_WEBDIC_SERV]
- 'type' : [DI_ESB|DQ|MDM|DP|TDS|MDM_WEB]
- 'dataPrepRoles' : [Administrator|Dataset Manager|Data Preparator]
- 'tdsRoles' : [Data Steward|Campaign Owner]
- 'mdmRoles' : [System_Admin|System_Interactive|System_Web|Super_Admin]
- 'dqDictRole' : [Semantic_types_manager|Semantic_types_viewer]
Requires authentication : true
Requires rights : User management
Since : 6.2
Sample :
{
'actionName': 'updateUserGroup',
'authPass': 'admin',
'authUser': 'admin@company.com',
'description': 'User group for testing purpose',
'id': '1',
'label': 'Test Group',
'type': 'DQ'
}
----------------------------------------------------------
Command: updateVirtualServer
----------------------------------------------------------
Description : Update a virtual execution server
Requires authentication : true
Requires rights : Server management
Since : 5.6
Sample :
{
'actionName': 'updateVirtualServer',
'authPass': 'admin',
'authUser': 'admin@company.com',
'clusterGroup': 'Cellar1',
'description': 'Talend virtual server in production',
'id': '1',
'label': 'VirtualServerName',
'timezone': 'US/Pacific'
}
----------------------------------------------------------
Command: userExist
----------------------------------------------------------
Description : Return true if a user exist
Requires authentication : true
Requires rights : User visualization
Since : 3.2
Sample :
{
'actionName': 'userExist',
'authPass': 'admin',
'authUser': 'admin@company.com',
'userLogin': 'john.smith@company.com'
}