erwin 9.x to 12.x Data Modeler (Single Model from mart) - Import
Bridge Requirements
This bridge:is only supported on Microsoft Windows.
requires the tool to be installed to access its SDK.
Bridge Specifications
| Vendor | erwin, Inc. |
| Tool Name | erwin Data Modeler |
| Tool Version | 9.x to 14.x |
| Tool Web Site | https://erwin.com/products/erwin-data-modeler/ |
| Supported Methodology | [Data Modeling] Data Store (Physical Data Model, Logical Data Model, Stored Procedure Expression Parsing), Graphical Layout via COM API on Native (.erwin) or Export (.XML) File |
| Data Profiling |  |
| Incremental Harvesting |  |
| Multi-Model Harvesting | |
| Remote Repository Browsing for Model Selection | |
SPECIFICATIONS
Tool: erwin, Inc. / erwin Data Modeler version 9.x to 14.x via COM API on Native (.erwin) or Export (.XML) File
See https://erwin.com/products/erwin-data-modeler/
Metadata: [Data Modeling] Data Store (Physical Data Model, Logical Data Model, Stored Procedure Expression Parsing), Graphical Layout
Component: CaErwin9Mart version 11.2.0
OVERVIEW
This import bridge imports data models from Erwin Mart, including logical only models with Entities, Attributes, Domains, physical only models with Tables, Columns, Data Types, or Logical/Physical models with both. This import bridge also imports all relationships and their implementation (e.g. PK/FK) as well as the graphical layout of the data models (diagrams).
REQUIREMENTS
WARNING: This import bridge uses the COM API of a Windows based tool client and/or SDK which must be (a) properly installed, (b) licensed on behalf of a Windows user capable of running this tool, and (c) capable of accessing the tool server content. In addition:
(1) As recommended by the tool vendor, the tool server must NOT be installed/coexist on the same machine where the tool client (and the import bridge) is installed/running because of potential conflicts of resources, including with respect to COM API.
(2) Windows COM API based tools are notoriously unstable after repeated failures or lack of system resources, which requires a Windows reboot to make that tool COM API work properly again.
(3) If this import bridge is running as an application, then it must be logged with the same above Windows user.
If the import bridge is running as a Windows service, then go to the services manager of Windows, right-click on the MIMB Application Server service, and go to the "Log On" tab to define an account by name under which the service will run.
- Erwin Installation:
This import bridge connects to the erwin Data Modeler Workgroup Edition mart using its COM API.
Thus, erwin Data Modeler Workgroup Edition must be installed with a valid license on the machine where this import bridge is running. This erwin installation must be able to connect to and open models in the same mart instance with the same connection information as specified in this import bridge parameters. Successful import depends upon the erwin API connecting to the mart server.
The erwin libraries used are EAL.dll and ERXML.dll
Starting with erwin Data Modeler 9.8 / 2021 R1, erwin requires the user to re-confirm the license in the UI if the tool has not been used for more than 72 hours.
In order to avoid this inconvenience, erwin Data Modeler should be installed through the 'Offline Activation' email process which is available only on a node locked license.
- erwin User:
This import bridge must run on behalf of the Windows user that can run the erwin software.
If this import bridge is running as part of a Windows desktop application, then this import bridge must log onto Windows with that user.
If this import bridge is running as part of a Windows service, then go to the Windows services and click on the 'Properties' menu of such service, go to the 'Log On' tab, select 'This account' and specify the same user name and password used as Windows session when testing connectivity from erwin to the mart, and restart the Windows service.
FREQUENTLY ASKED QUESTIONS
Q: What are the required configuration steps to support large models?
A: First, configure the Mart server with larger java memory settings for the Tomcat application server.
Read this Knowledge Base article for details: http://erwin-knowledgebase.com/index.php?View=entry&EntryID=3724
Then, configure MIMB with larger java memory settings to use in this import bridge.
Update the file $MetaIntegration/conf/conf.properties with appropriate -Xmx parameter for a 64 bit JVM, for example:
M_JAVA_HOME=..\jre
M_JAVA_OPTIONS=-Xmx7G
This import bridge Miscellaneous parameter can also be used to specify the amount of Java memory to allocate.
Q: What does the following error message mean, "The process 'C:\windows\System32\cscript.exe' failed with return code 1"?
A: There is a possibility that the Windows Service account used by the import bridge is incorrect or the Local System account is specified. Local System account is not supported as a "Log on" type, verify that the account used is identical to the Windows log-on account.
LIMITATIONS
Refer to the current general known limitations at https://metaintegration.com/Products/MIMB/Help/#!Documents/mimbknownlimitations.html
erwin Marts on Oracle databases are only supported with erwin and Mart version 9.1 or later.
SUPPORT
Provide a troubleshooting package with:
- the debug log (can be set in the UI or in conf/conf.properties with MIR_LOG_LEVEL=6)
- the metadata backup if available (can be set in the Miscellaneous parameter with -backup option, although this common option is not implemented on all bridges for technical reasons).
-erwin Windows COM API debugging:
This import bridge uses the erwin Windows COM API via simple scripts (ErwinApi.js and ErwinXml.js).
If these scripts are not working properly, contact erwin support to debug the issue (which may require re-installing erwin).
The scripts can be tested as follows:
cscript.exe //E:jscript //Nologo .\conf\MIRModelBridgeTemplate\ERwin\ERwinApi.js -version 9 -GetVersion
cscript.exe //E:jscript //Nologo .\conf\MIRModelBridgeTemplate\ERwin\ERwinXml.js -version 9 -from eMovies.erwin -to eMovies.xml -log eMoviesLog.txt
- Warning On Potential Popup Messages:
When importing .erwin models, there is a possibility that erwin may present a popup window that is unavailable for this import bridge to respond to.
The result is this import bridge will hang during import. A possible workaround recommended by the vendor is to modify the registry as follows, to avoid popup messages:
* Edit the registry on the machine where this import bridge is running, using Regedit.exe
* Look for the key:
for version 9.0 to 9.6: HKEY_CURRENT_USER\Software\CA\ERwin Data Modeler\9.0\Messages
for version 9.7: HKEY_CURRENT_USER\Software\erwin\Data Modeler\9.7\Messages
* Add data 'GDM-46=1;' to the value 'Message Status'
Bridge Parameters
| Parameter Name | Description | Type | Values | Default | Scope | ||||
| Server name | The network host name used when connecting to the erwin Mart server, e.g. localhost |
STRING | localhost | Mandatory | |||||
| Server port | The network port used when connecting to the erwin Mart server. | NUMERIC | 18170 | ||||||
| Use IIS | The use of Microsoft Internet Information Services (IIS) when connecting to the erwin Mart server: 'True' Connects to MartServer using Microsoft IIS, the port number may be dynamically assigned. 'False' Use the specified port number when connecting to the erwin Mart Server, in which case the port number must be specified. |
BOOLEAN |
|
False | |||||
| Use SSL | The use of Secure Sockets Layer (SSL) when connecting to the erwin Mart server (this parameter is only applicable for erwin Mart version 9.1 or later): 'True' Connects to MartServer using SSL (encrypted HTTPS connection). 'False' Connect to MartServer using a standard HTTP connection. |
BOOLEAN |
|
False | |||||
| Application name | The name of the application when connecting to the erwin Mart Server. | STRING | MartServer | Mandatory | |||||
| Authentication | The type of authentication used when connecting to the erwin Mart server: 'Server Authentication' Mart Server user name and password. 'Windows Authentication' Windows username and password for secure database access. In Windows Authentication mode, this import bridge parameters 'User name' and 'password' are not used. Instead, the login credentials are inferred from the current Windows session running this import bridge. If this import bridge is executed from a parent application running as a Windows service, this import bridge uses the credentials under which the Windows service was started. |
ENUMERATED |
|
Server Authentication | |||||
| User name | The user name for Server Authentication. This parameter is not used in Windows Authentication mode. | STRING | |||||||
| Password | The user password for Server Authentication. This parameter is not used in Windows Authentication mode. | PASSWORD | |||||||
| Model | The erwin model locator string, e.g. mart://Mart/Samples/eMovies |
REPOSITORY_MODEL | Mandatory | ||||||
| Import UDPs | In erwin data modeler, a User Defined Property (UDP) is defined with a name (e.g. Threat Level), a definition (e.g. an enumeration with values: green, yellow, orange, red), and a possible default value (e.g. green). Applying a UDP to an object (e.g. table or column) can be done with an explicit value (e.g. orange) or without value therefore the default value of the UDP (e.g. green). UDP can be imported: 'As metadata' Import an explicit value as Property Value, implicit values are not imported, the default value is kept on the Property Type only. 'As metadata, migrate default values' Import explicit and implicit values as Property Value objects. 'In description, migrate default values' Append the property name and value, even if implicit, to the object's description and/or comment (depending upon the design level). This allows you to export the UDP values to another tool which does not support the notion of UDP. 'Both, migrate default values' Import the UDP value, even if implicit, both as metadata and in the object's description and/or comment (depending upon the design level). |
ENUMERATED |
|
As metadata | |||||
| Import relationship name | Controls how the erwin relationship names are imported: 'From relationship name' from the name property. 'From derived name' from the verb phrase derived name. |
ENUMERATED |
|
From relationship name | |||||
| Import column order from | In erwin data modeler, the columns physical order can viewed through edit the current subject area 'Stored Display Settings', then click on tab 'Physical', group 'Display Level', then on the 'Physical Order' radio button. Controls how the erwin table's column order is imported: 'Column order' Order of the columns displayed in the erwin physical view. 'Physical order' Order of the columns in the database, as generated in SQL DDL. |
ENUMERATED |
|
Physical order | |||||
| Import owner schemas | Controls how the erwin owner schemas are imported: 'True' The owner schema for Tables and views and other database objects is imported. 'False' The owner schema for Tables and views and other database objects is ignored. This option may be useful for models where physical names are not unique, to indicate the model should be treated as a logical model (not ready for SQL DDL generation) while physical information is still maintained the model. |
BOOLEAN |
|
True | |||||
| Import diagrams | Controls how the erwin data model diagrams are imported: 'None' Diagrams are not imported. 'Current view' Only the current view of the diagrams are imported. 'All' Diagrams are imported twice: once for the logical view and once for the physical view. |
ENUMERATED |
|
Current view | |||||
| Move entities to subject areas | In erwin data modeler, entities belong under the model and may be assigned to one or more subject areas. Move entities to subject areas: 'True' In order to use subject areas as conventional (UML) design packages with their own namespace where any entity may belong to ONLY one subject area. Specifically, if entities belong to only one subject area, they will be placed in the corresponding package. Other entities are placed under the model. Additionally, this option assumes that all entities are defined within a user defined subject area. 'False' |
BOOLEAN |
|
False | |||||
| Miscellaneous | INTRODUCTION Specify miscellaneous options starting with a dash and optionally followed by parameters, e.g. -connection.cast MyDatabase1="MICROSOFT SQL SERVER" Some options can be used multiple times if applicable, e.g. -connection.rename NewConnection1=OldConnection1 -connection.rename NewConnection2=OldConnection2; As the list of options can become a long string, it is possible to load it from a file which must be located in ${MODEL_BRIDGE_HOME}\data\MIMB\parameters and have the extension .txt. In such case, all options must be defined within that file as the only value of this parameter, e.g. ETL/Miscellaneous.txt JAVA ENVIRONMENT OPTIONS -java.memory <Java Memory's maximum size> (previously -m) 1G by default on 64bits JRE or as set in conf/conf.properties, e.g. -java.memory 8G -java.memory 8000M -java.parameters <Java Runtime Environment command line options> (previously -j) This option must be the last one in the Miscellaneous parameter as all the text after -java.parameters is passed "as is" to the JRE, e.g. -java.parameters -Dname=value -Xms1G The following option must be set when a proxy is used to access internet (this is critical to access https://repo.maven.apache.org/maven2/ and exceptionally a few other tool sites) in order to download the necessary third-party software libraries. Note: The majority of proxies are concerned with encrypting (HTTPS) the outside (of the company) traffic and trust the inside traffic that can access proxy over HTTP. In this case, an HTTPS request reaches the proxy over HTTP where the proxy HTTPS-encrypts it. -java.parameters -java.parameters -Dhttp.proxyHost=127.0.0.1 -Dhttp.proxyPort=3128 -Dhttp.proxyUser=user -Dhttp.proxyPassword=pass MODEL IMPORT OPTIONS -model.name <model name> Override the model name, e.g. -model.name "My Model Name" -prescript <script name> This option allows running a script before the bridge execution. The script must be located in the bin directory (or as specified with M_SCRIPT_PATH in conf/conf.properties), and have .bat or .sh extension. The script path must not include any parent directory symbol (..). The script should return exit code 0 to indicate success, or another value to indicate failure. For example: -prescript "script.bat arg1 arg2" -postscript <script name> This option allows running a script after successful execution of the bridge. The script must be located in the bin directory (or as specified with M_SCRIPT_PATH in conf/conf.properties), and have .bat or .sh extension. The script path must not include any parent directory symbol (..). The script should return exit code 0 to indicate success, or another value to indicate failure. For example: -postscript "script.bat arg1 arg2" -cache.clear Clears the cache before the import, and therefore will run a full import without incremental harvesting. If the model was not changed and the -cache.clear parameter is not used (incremental harvesting), then a new version will not be created. If the model was not changed and the -cache.clear parameter is set (full source import instead of incremental), then a new version will be created. -backup <directory> Allows to save the input metadata for further troubleshooting. The provided <directory> must be empty. -restore <directory> Specify the backup <directory> to be restored. DATA CONNECTION OPTIONS Data Connections are produced by the import bridges typically from ETL/DI and BI tools to refer to the source and target data stores they use. These data connections are then used by metadata management tools to connect them (metadata stitching) to their actual data stores (e.g. databases, file system, etc.) in order to produce the full end to end data flow lineage and impact analysis. The name of each data connection is unique by import model. The data connection names used within DI/BI design tools are used when possible, otherwise connection names are generated to be short but meaningful such as the database / schema name, the file system path, or Uniform Resource Identifier (URI). The following option allows to manipulate connections. These options replaces the legacy options -c, -cd, and -cs. -connection.cast ConnectionName=ConnectionType Casts a generic database connection (e.g. ODBC/JDBC) to a precise database type (e.g. ORACLE) for SQL Parsing, e.g. -connection.cast "My Database"="MICROSOFT SQL SERVER". The list of supported data store connection types includes: ACCESS APACHE CASSANDRA DB2/UDB DENODO GOOGLE BIGQUERY HIVE MYSQL NETEZZA ORACLE POSTGRESQL PRESTO REDSHIFT SALESFORCE SAP HANA SNOWFLAKE MICROSOFT SQL AZURE MICROSOFT SQL SERVER SYBASE SQL SERVER SYBASE AS ENTERPRISE TERADATA VECTORWISE HP VERTICA -connection.rename OldConnection=NewConnection Renames an existing connection to a new name, e.g. -connection.rename OldConnectionName=NewConnectionName Multiple existing database connections can be renamed and merged into one new database connection, e.g. -connection.rename MySchema1=MyDatabase -connection.rename MySchema2=MyDatabase -connection.split oldConnection.Schema1=newConnection Splits a database connection into one or multiple database connections. A single database connection can be split into one connection per schema, e.g. -connection.split MyDatabase All database connections can be split into one connection per schema, e.g. -connection.split * A database connection can be explicitly split creating a new database connection by appending a schema name to a database, e.g. -connection.split MyDatabase.schema1=MySchema1 -connection.map SourcePath=DestinationPath Maps a source path to destination path. This is useful for file system connections when different paths points to the same object (directory or file). On Hadoop, a process can write into a CSV file specified with the HDFS full path, but another process reads from a Hive table implemented (external) by the same file specified using a relative path with default file name and extension, e.g. -connection.map /user1/folder=hdfs://host:8020/users/user1/folder/file.csv On Linux, a given directory (or file) like /data can be referred to by multiple symbolic links like /users/john and /users/paul, e.g. -connection.map /data=/users/John -connection.map /data=/users/paul On Windows, a given directory like C:\data can be referred to by multiple network drives like M: and N:, e.g. -connection.map C:\data=M:\ -connection.map C:\data=N:\ -connection.casesensitive ConnectionName... Overrides the default case insensitive matching rules for the object identifiers inside the specified connection, provided the detected type of the data store by itself supports this configuration (e.g. Microsoft SQL Server, MySql etc.), e.g. -connection.casesensitive "My Database" -connection.caseinsensitive ConnectionName... Overrides the default case sensitive matching rules for the object identifiers inside the specified connection, provided the detected type of the data store by itself supports this configuration (e.g. Microsoft SQL Server, MySql etc.), e.g. -connection.caseinsensitive "My Database" -connection.level AggregationLevel Specifies the aggregation level for the external connections, e.g.-connection.level catalog The list of the supported values: server catalog schema (default) |
STRING |
Bridge Mapping
| Meta Integration Repository (MIR) Metamodel (based on the OMG CWM standard) |
"erwin 9.x to 14.x Data Modeler (Single Model from Mart)" Metamodel CA ERwin Data Modeler (Model) |
Mapping Comments |
| Argument | Argument | |
| Comment | Comment | |
| DefaultValue | Default Value | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Kind | Kind | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| Position | Position | |
| Association | Relationship | |
| Aggregation | Identifying | True if identifying |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| ExtraConstraint | Constraint | |
| Name | Name | |
| NativeId | Native Id | |
| AssociationRole | Unnamed RelationshipEnd, Named RelationshipEnd | |
| Multiplicity | Cardinality | |
| Name | Name | |
| OnDelete | On Delete | |
| OnInsert | On Insert | |
| OnUpdate | On Update | |
| Source | Source | Based on the multiplicity of each role and the Identifying/Non Identifying property |
| Attribute | Attribute, Column, Primary Key Column - Attribute, Primary Key Attribute, Column - Attribute, Primary Key Column | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| ExtraConstraint | Constraint | if the validation rule cannot be set on the type |
| Generate | Generate | |
| InitialValue | Default Value | imported from the default value tag associated to this type |
| Name | Physical Name, Name | |
| NativeId | Native Id | |
| Optional | Nullable | |
| PhysicalName | Physical Name | |
| Position | Position | |
| BusinessRule | Min - Max, Valid Values List, Default Value, User-Defined | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| LowerBound | Min | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| UpperBound | Max | |
| Value | Default Value, Text | |
| CandidateKey | Candidate Key Group | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | if set by the user |
| UniqueKey | Unique Key | True for Primary Key/Alternate Key, False for Inversion Entries |
| Class | Entity, Table, Table - Entity, Data Source Table | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| DimensionalRole | Dimensional Role | |
| DimensionalType | Dimensional Type | |
| Generate | Generate | |
| Name | Physical Name, Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| ClassDiagram | ER Diagram | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| MaxDefinitionLength | Max Definition Length | |
| Name | Name | |
| NativeId | Native Id | |
| Notation | Notation | |
| PhysicalName | Physical Name | |
| Condition | Condition | |
| Name | Name | |
| ConnectionNamespace | Folder, Directory | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| ConnectionPackage | Data Source Schema | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| DatabaseSchema | Database Schema | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| DerivedType | Domain | The MIR UserDefined property is set to True for User Defined Domains |
| Comment | Comment | |
| DataType | Data Type | See datatype conversion arrays |
| Description | Definition | |
| DesignLevel | Design Level | |
| InitialValue | Initial Value | imported from the default value tag associated to this type |
| Length | Length | extracted from the datatype |
| LowerBound | Lower Bound | imported from the validation rule associated to this type |
| Name | Name | |
| NativeDataType | Native Data Type | |
| NativeId | Native Id | |
| NativeLogicalDataType | Native Logical Data Type | |
| PhysicalName | Physical Name | computed from the datatype, length and precision |
| Scale | Scale | extracted from the datatype |
| UpperBound | Upper Bound | imported from the validation rule associated to this type |
| UserDataType | User Data Type | |
| DesignPackage | Subject Area | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Name | Name | |
| NativeId | Native Id | |
| FlatTextFile | Data Source File, File | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Name | Physical Name, Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| ForeignKey | Foreign Key Group | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Generate | Generate | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | if set by the user |
| Generalization | Subtype Relationship | |
| Complete | Complete | |
| Description | Definition | |
| DesignLevel | Design Level | set to Logical Only if involved in a transformation |
| Exclusive | Exclusive | |
| Name | Name | |
| NativeId | Native Id | |
| GeneralizationRole | Subtype Relationship Role | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Name | Name | |
| NativeId | Native Id | |
| OnDelete | On Delete | |
| OnInsert | On Insert | |
| OnUpdate | On Update | |
| Identity | Identity | |
| Cache | Cache | |
| Cycle | Cycle | |
| IncrementValue | Increment Value | |
| MaximumValue | Maximum Value | |
| MinimumValue | Minimum Value | |
| Name | Name | |
| StartValue | Start Value | |
| Index | Index | |
| Clustered | Clustered | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Generate | Generate | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| Unique | Unique | |
| IndexMember | Index Member | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| NativeId | Native Id | |
| Position | Position | |
| SortOrder | Sort Order | |
| Note | Note | |
| Author | Author | |
| Importance | Importance | |
| ModificationTime | Modification Time | |
| Name | Name | |
| NativeId | Native Id | |
| Status | Status | |
| Value | Note | |
| PhysicalObject | SQLServer Database, Oracle Database, Storage Group, DB2 Database, File Group | |
| Comment | Comment | |
| Name | Name | |
| NativeId | Native Id | |
| PropertyElementTypeScope | UDPs | used for UDP values and column physical information specific to Teradata: COMPRESS, CASE and FORMAT |
| Name | Name | |
| Scope | Scope | |
| PropertyType | UDP | UDP design level: Logical and/or Physical |
| DataType | Data Type | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Group | Group | |
| InitialValue | Initial Value | |
| Name | Name | |
| NativeId | Native Id | |
| Position | Position | |
| Usage | Usage | set to User |
| SQLViewAssociation | View Relationship | |
| AliasName | Alias Name | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| SQLTableSequence | Sequence | |
| SQLViewAttribute | View Column | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Expression | Expression | |
| InitialValue | Default Value | |
| Name | Name | |
| NativeId | Native Id | |
| Optional | Nullable | |
| Position | Position | |
| SQLViewEntity | View | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| DimensionalRole | Dimensional Role | |
| Generate | Generate | |
| GroupByClause | Group By Clause | |
| HavingClause | Having Clause | |
| Name | Name | |
| NativeId | Native Id | |
| OrderByClause | Order By Clause | |
| SelectType | Select Type | |
| ViewStatement | View Statement | |
| ViewStatementType | View Statement Type | |
| ViewType | View Type | |
| WhereClause | Where Clause | The View SQL if user defined or else the Where clause |
| Sequence | Sequence | |
| Comment | Comment | |
| DataType | Data Type | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Generate | Generate | |
| Length | Length | |
| Name | Name | |
| NativeDataType | Native Data Type | |
| NativeId | Native Id | |
| Scale | Scale | |
| StoreConnection | Model Source, Data Source | |
| Comment | Comment | |
| Connection | Connection | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| StoreType | Store Type | |
| SystemMajorVersion | System Major Version | |
| SystemMinorVersion | System Minor Version | |
| SystemReleaseVersion | System Release Version | |
| SystemType | System Type | |
| SystemTypeOld | System Type Old | |
| StoreModel | Model | |
| Author | Author | |
| Comment | Comment | |
| CreationTime | Creation Time | |
| Description | Definition | |
| DesignLevel | Design Level | |
| ModificationTime | Modification Time | |
| Modifier | Modifier | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| StoreType | Store Type | |
| SystemMajorVersion | System Major Version | |
| SystemMinorVersion | System Minor Version | |
| SystemReleaseVersion | System Release Version | |
| SystemType | System Type | |
| SystemTypeOld | System Type Old | |
| StoredProcedure | Stored Procedure | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Generate | Generate | |
| Name | Name | |
| NativeId | Native Id | |
| Postcondition | Postcondition | |
| Precondition | Precondition | |
| Semantics | Code | |
| Synonym | Synonym | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Generate | Generate | |
| Name | Name | |
| NativeId | Native Id | |
| Trigger | Trigger | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| FireOnDelete | Fire On Delete | |
| FireOnInsert | Fire On Insert | |
| FireOnUpdate | Fire On Update | |
| Generate | Generate | |
| Name | Name | |
| NativeId | Native Id | |
| Semantics | Code | |
| TriggerType | Trigger Type | |
| TypeValue | Type Value | |
| Comment | Comment | |
| Description | Definition | |
| DesignLevel | Design Level | |
| Name | Name | |
| NativeId | Native Id | |
| PhysicalName | Physical Name | |
| Position | Position | |
| Value | Value |