Skip to main content Skip to complementary content

tOracleOutput Standard properties

These properties are used to configure tOracleOutput running in the Standard Job framework.

The Standard tOracleOutput component belongs to the Databases family.

The component in this framework is available in all Talend products.

Information noteNote: This component is a specific version of a dynamic database connector. The properties related to database settings vary depending on your database type selection. For more information about dynamic database connectors, see DB Generic components.

Basic settings

Database

Select the desired database type from the list and click Apply.

Property type

Either Built-in or Repository .

 

Built-in: No property data stored centrally.

 

Repository: Select the repository file in which the properties are stored. The fields that follow are completed automatically using the data retrieved.

Click this icon to open a database connection wizard and store the database connection parameters you set in the component Basic settings view.

For more information about setting up and storing database connection parameters, see Centralizing database metadata.

Use an existing connection

Select this check box and in the Component List drop-down list, select the desired connection component to reuse the connection details you already defined.

Information noteNote: When a Job contains the parent Job and the child Job, do the following if you want to share an existing connection between the parent Job and the child Job (for example, to share the connection created by the parent Job with the child Job).
  1. In the parent level, register the database connection to be shared in the Basic settings view of the connection component which creates that very database connection.
  2. In the child level, use a dedicated connection component to read that registered database connection.

For an example about how to share a database connection across Job levels, see Sharing a database connection.

Connection type

Drop-down list of available drivers.

  • Oracle OCI: Select this connection type to use Oracle Call Interface with a set of C-language software APIs that provide an interface to the Oracle database.

  • Oracle Custom: Select this connection type to access a clustered database.

  • Oracle Service Name: Select this connection type to use the TNS alias that you give when you connect to the remote database.

  • WALLET: Select this connection type to store credentials in an Oracle wallet.

  • Oracle SID: Select this connection type to uniquely identify a particular database on a system.

DB Version

Select the Oracle version in use.

Host

Database server IP address.

Port

Listening port number of DB server.

Database

Name of the database.

Username and Password

DB user authentication data.

To enter the password, click the [...] button next to the password field, enter the password in double quotes in the pop-up dialog box, and click OK to save the settings.

Table

Name of the table to be written. Note that only one table can be written at a time.

Action on table

Information noteNote:

The Action on table list will not be available if you select the Enable parallel execution check box in the Advanced settings view.

On the table defined, you can perform one of the following operations.

  • Default: No operation is carried out.

  • Drop and create table: The table is removed and created again.

  • Create table: The table does not exist and gets created.

  • Create table if does not exist: The table is created if it does not exist.

  • Drop table if exists and create: The table is removed if it already exists and created again.

  • Clear table: The table content is deleted.

  • Truncate table: The table content is deleted. You do not have the possibility to rollback the operation.

  • Truncate table with reuse storage: The table content is deleted.

    You do not have the possibility to rollback the operation. However, it is allowed to reuse the existing storage allocated to the table though the storage is considered empty.

Information noteWarning:

If you select the Use an existing connection check box and select an option other than Default from the Action on table list, a commit statement will be generated automatically before the data insert/update/delete operation.

Action on data

On the data of the table defined, you can perform:

Insert: Add new entries to the table. If duplicates are found, job stops.

  • Update: Make changes to existing entries.
    Information noteNote: In cases where all the schema columns are set as keys, this action yields an error and the Job fails.
  • Insert or update: Insert a new record. If the record with the given reference already exists, an update would be made.
    Information noteNote: In cases where all the schema columns are set as keys, this action yields a warning message and the Job continues.
  • Update or insert: Update the record with the given reference. If the record does not exist, a new record would be inserted.
    Information noteNote: In cases where all the schema columns are set as keys, this action yields a warning message and the Job continues.
  • Delete: Remove entries corresponding to the input flow.

Information noteWarning: It is necessary to specify at least one column as a primary key on which the Update and Delete operations are based. You can do that by clicking Edit Schema and selecting the check box(es) next to the column(s) you want to set as primary key(s). For an advanced use, click the Advanced settings view where you can simultaneously define primary keys for the Update and Delete operations. To do that: Select the Use field options check box and then in the Key in update column, select the check boxes next to the column names you want to use as a base for the Update operation. Do the same in the Key in delete column for the Delete operation.
Information noteNote: The dynamic schema feature can be used in the following modes: Insert; Update; Insert or update; Update or insert; Delete.

Schema and Edit schema

A schema is a row description, it defines the number of fields to be processed and passed on to the next component. The schema is either Built-in or stored remotely in the Repository.

Click Edit schema to make changes to the schema. If the current schema is of the Repository type, three options are available:

  • View schema: choose this option to view the schema only.

  • Change to built-in property: choose this option to change the schema to Built-in for local changes.

  • Update repository connection: choose this option to change the schema stored in the repository and decide whether to propagate the changes to all the Jobs upon completion.

    If you just want to propagate the changes to the current Job, you can select No upon completion and choose this schema metadata again in the Repository Content window.

This component offers the advantage of the dynamic schema feature. This allows you to retrieve unknown columns from source files or to copy batches of columns from a source without mapping each column individually. For further information about dynamic schemas, see Dynamic schema.

This dynamic schema feature is designed for the purpose of retrieving unknown columns of a table and is recommended to be used for this purpose only; it is not recommended for the use of creating tables.

When writing data with Oracle Long type using dynamic schema feature, to avoid data overflow during data type conversion, change the default length in the length property of the mapping file for the Oracle Long type or configure the length with dynamic metadata.

 

Built-In: You create and store the schema locally for this component only.

 

Repository: You have already created the schema and stored it in the Repository. You can reuse it in various projects and Job designs.

When the schema to be reused has default values that are integers or functions, ensure that these default values are not enclosed within quotation marks. If they are, you must remove the quotation marks manually.

For more information, see Retrieving table schemas.

Die on error

This check box is selected by default. Clear the check box to skip the row on error and complete the process for error-free rows. If needed, you can retrieve the rows on error via a Row>Rejects link.

Specify a data source alias

Select this check box and specify the alias of a data source created on the Talend Runtime side to use the shared connection pool defined in the data source configuration. This option works only when you deploy and run your Job in Talend Runtime .

If you use the component's own DB configuration, your data source connection will be closed at the end of the component. To prevent this from happening, use a shared DB connection with the data source alias specified.

This check box is not available when the Use an existing connection check box is selected.

Advanced settings

Use alternate schema

Select this option to use a schema other than the one specified by the component that establishes the database connection (that is, the component selected from the Component list drop-down list in Basic settings view). After selecting this option, provide the name of the desired schema in the Schema field.

This option is available when Use an existing connection is selected in Basic settings view.

Additional JDBC parameters

Specify additional connection properties for the DB connection you are creating. This option is not available if you have selected the Use an existing connection check box in the Basic settings view.

Information noteNote: You can press Ctrl+Space to access a list of predefined global variables.

Commit every

Enter the number of rows to be completed before committing batches of rows together into the DB. This option ensures transaction quality (but not rollback) and, above all, better performance at execution.

tStatCatcher Statistics

Select this check box to collect log data at the component level.

Additional Columns

This option is not offered if you create (with or without drop) the DB table. This option allows you to call SQL functions to perform actions on columns, which are not insert, nor update or delete actions, or actions that require particular preprocessing.

 

Name: Type in the name of the schema column to be altered or inserted as new column.

 

SQL expression: Type in the SQL statement to be executed in order to alter or insert the relevant column data.

 

Position: Select Before, Replace, or After following the action to be performed on the reference column.

 

Reference column: Type in a column of reference that the tDBOutput can use to place or replace the new or altered column.

Use field options

Select this check box to customize a request, especially when there is double action on data.

Use Hint Options

Select this check box to activate the hint configuration area which helps you optimize a query's execution. In this area, parameters are:

  • HINT: specify the hint you need, using the syntax /*+ */.
  • POSITION: specify where you put the hint in a SQL statement.
  • SQL STMT*: select the SQL statement you need to use.

Convert columns and table to uppercase

Select this check box to set the names of columns and table in upper case.

Debug query mode

Select this check box to display each step during processing entries in a database.

Use Batch Size

Select this check box to activate the batch mode for data processing.

Batch Size

Specify the number of records to be processed in each batch.

This field appears only when the Use batch mode check box is selected.

Support null in "SQL WHERE" statement

Select this check box to validate null in "SQL WHERE" statement.

Write BLOB values from a different DB

Select this option if the input data contains BLOB objects that are from a database other than the currently connected database. If this option is not selected, this component uses the input Oracle connection configuration to retrieve the input data.

Enable parallel execution

Select this check box to perform high-speed data processing, by treating multiple data flows simultaneously. Note that this feature depends on the database or the application ability to handle multiple inserts in parallel as well as the number of CPU affected. In the Number of parallel executions field, either:
  • Enter the number of parallel executions desired.
  • Press Ctrl + Space and select the appropriate context variable from the list. For further information about context variables, see Using contexts and variables.

Note that when parallel execution is enabled, it is not possible to use global variables to retrieve return values in a subJob.

  • The Action on table field is not available with the parallelization function. Therefore, you must use a tCreateTable component if you want to create a table.
  • When parallel execution is enabled, it is not possible to use global variables to retrieve return values in a subJob.
Support NLS

Select this option to enable globalization support. See Overview of Globalization Support for related information.

This option is available when the Use an existing connection option is cleared and Oracle 18 and above is selected from the DB Version drop-down list in the Basic settings view.

Information noteNote: This option is available only when you have installed the 8.0.1-R2022-09 Talend Studio Monthly update or a later one delivered by Talend. For more information, check with your administrator.

Global Variables

Global Variables

  • NB_LINE: the number of rows read by an input component or transferred to an output component. This is an After variable and it returns an integer.

  • NB_LINE_UPDATED: the number of rows updated. This is an After variable and it returns an integer.

  • NB_LINE_INSERTED: the number of rows inserted. This is an After variable and it returns an integer.

  • NB_LINE_DELETED: the number of rows deleted. This is an After variable and it returns an integer.

  • NB_LINE_REJECTED: the number of rows rejected. This is an After variable and it returns an integer.

  • QUERY: the query statement processed. This is an After variable and it returns a string.

To fill up a field or expression with a variable, press Ctrl+Space to access the variable list and choose the variable to use from it.

For more information about variables, see Using contexts and variables.

A Flow variable functions during the execution of a component while an After variable functions after the execution of the component.

Usage

Usage rule

This component offers the flexibility benefit of the DB query and covers all of the SQL queries possible.

Row > Rejects This component must be used as an output component. It allows you to carry out actions on a table or on the data of a table in an Oracle database. It also allows you to create a reject flow using a link to filter data in error. For an example of tMysqlOutput in use, see Retrieving data in error with a Reject link.

Dynamic settings

Click the [+] button to add a row in the table and fill the Code field with a context variable to choose your database connection dynamically from multiple connections planned in your Job. This feature is useful when you need to access database tables having the same data structure but in different databases, especially when you are working in an environment where you cannot change your Job settings, for example, when your Job has to be deployed and executed independent of Talend Studio.

The Dynamic settings table is available only when the Use an existing connection check box is selected in the Basic settings view. Once a dynamic parameter is defined, the Component List box in the Basic settings view becomes unusable.

For examples on using dynamic parameters, see Reading data from databases through context-based dynamic connections and Reading data from different MySQL databases using dynamically loaded connection parameters. For more information on Dynamic settings and context variables, see Dynamic schema and Creating a context group and define context variables in it.

Limitation

Due to license incompatibility, one or more JARs required to use this component are not provided. You can install the missing JARs for this particular component by clicking the Install button on the Component tab view. You can also find out and add all missing JARs easily on the Modules tab in the Integration perspective of Talend Studio. For details, see Installing external modules.

Did this page help you?

If you find any issues with this page or its content – a typo, a missing step, or a technical error – please let us know!