List Box

The list box is the most basic sheet object. It contains a list of all possible values of a specific field. Each row in the list box can represent several records in the loaded table, all with identical values. Selecting one value may thus be equivalent to selecting several records in the loaded table.

A list box may also contain a cyclic or drill-down group. If a drill-down group is used, selecting a single value in the list box will cause the list box to drill down and switch to the next underlying field in the group. Drilling back up can be accomplished by clicking the drill-up icon in the list box caption.

If a cyclic group is assigned to a list box it can be made to show the next field in the group by clicking on the cycle icon that appears in the list box caption. You may also go directly to any field in the group by using the Cycle option on the list box object menu.

Right-click on the list box to display the Object menu.

Object Menu

The list box Object menu is opened by right-clicking the object. The menu commands are:

Object menu commands
Command	Description
Properties...	Opens the List Box Properties dialog where a number of parameters can be set.
Notes	Allows creating and sharing notes about the current object.
Cycle	Only available when the list box is set to display a cyclic group. Opens a cascade menu with the fields of the group for direct selection of which field to be displayed in the list box. For more information, see Non-hierarchic groups (cyclic)
Search	Opens the search box. For more information, see Search
Fuzzy Search	Opens the text search box in fuzzy search mode. For more information, see Fuzzy Search
Advanced Search	Opens the advanced search dialog. The dialog makes it possible to enter advanced search expressions. This command can also be invoked by the following keyboard shortcut: Ctrl+Shift+F. For more information, see Advanced Search dialog
Order	This cascade menu is only available when the Design Grid command of the View menu is activated or when the Always Show Design Menu Items under User Preferences: Design is checked. It contains four commands to set the layout layer of the sheet objects. Valid layer numbers are -128 to 127. Bring to Front: Sets the layout layer of the sheet object to the largest value currently used by any sheet object on the current sheet. Send to Back: Sets the layout layer of the sheet object to the smallest value currently used by any sheet object on the current sheet. Bring Forward: Increases the layout layer of the sheet object by one. Maximum value is 127. Send Backward: Decreases the layout layer of the sheet object by one. Minimum value is -128.
Change Value	Only available for list boxes displaying input fields. Sets the cell clicked on in input edit mode. Equivalent to clicking the input icon in the cell.
Restore Values	Only available for list boxes displaying input fields. Opens a cascade menu with three options: Restore Single Value: Restores the value in the field value clicked on to its default value from the script. Restore Possible Values: Restores the values of all possible field values to their default values from the script. Restore All Values: Restores the values of all field values to their default values from the script.
Select Possible	All non-excluded values in the list box are selected.
Select Excluded	All excluded values in the list box are selected.
Select All	All values in the list box are selected.
Clear	Clears all the current selections in the active list box.
Clear other fields	Clears the selections in all the other sheet objects, while maintaining the ones in the current list box.
Lock	Locks the selected value(s) in the active list box. (Grayed if no selections have been made).
Unlock	Unlocks the locked value(s) in the active list box. (Appears instead of Lock if selections have been locked).
Create Quick Chart...	Opens the Quick Chart wizard that helps you create a chart in a quick and easy way. For more information, see Quick Chart Wizard
Create Time Chart...	Opens the Time Chart that makes it possible to build a chart where a given measure (expression) should be qualified and often compared by different time periods. For more information, see Time Chart Wizard
Create Statistics Box	Performs various statistical calculations on selected values of a field (sample) and displays the results in a statistics box.
Print Possible...	Opens the Print dialog where print settings can be specified. All non-excluded values of the active list box are sent to the printer. For more information, see Print: General
Print Possible as PDF...	Opens the Print dialog with the Microsoft Print to PDF printer pre-selected. After pressing the Print button you will be prompted for a file name for the PDF output file. This command is only available if a PDF printer is available on the system.
Send to Excel	Exports possible (including selected) values to Microsoft Excel, which is automatically launched if not already running. The exported values will appear in a new Excel worksheet. For this functionality to work Microsoft Excel 2007 or later must be installed on the computer. Information noteMini charts will not be displayed when exporting to Excel!
Export...	Opens the Save as dialog where path, file name and (table) file type for the exported data content can be specified.
Copy to Clipboard	This cascade menu contains the various copy options for the sheet object. Possible Values: Copies the possible (selected and optional) values to the clipboard. Cell Value: Copies the text value of the list box cell right-clicked upon (when invoking the Object menu) to the clipboard. Image: Copies an image of the sheet object to the clipboard. The image will include or exclude the sheet object caption and border depending on the settings in the User Preferences: Export page. Object: Copies the entire sheet object to the clipboard for pasting elsewhere in the layout or in another document opened within the current instance of QlikView.
Linked Objects	Opens a menu with the following commands for linked objects. Adjust Position of Linked Objects: All linked objects on all sheets are adjusted to the same position and size as the one/ones highlighted. Unlink This Object/Unlink Objects: This destroys the link between the objects, making them different objects with different object IDs.
Minimize	Iconizes the object. Clicking on the icon in the object caption (if shown) produces the same result. This command is available only if minimizing is allowed in the object's Properties dialog on the Caption page.
Maximize	Enlarges the object to fill the sheet. Clicking on the icon in the object caption (if shown) produces the same result. This command is available only if maximizing is allowed in the object's Properties dialog on the Caption page.
Restore	Restores a minimized or maximized object to its previous size and location. Double-clicking the icon of a minimized object or clicking the icon in the object caption (if shown) of a maximized object produces the same result. This command is available only for minimized or maximized objects.
Help	Opens QlikView help.
Remove	Removes the sheet object from the sheet.

General

The List box Properties: General tab is opened by a right-click on a list box and choosing the Properties command in the float menu. Here it is possible to set general parameters of the list box.

List box parameters
Parameter	Description
Title	The text to appear in the list box caption. The default text is the name of the selected field. The title can also be defined as a calculated formula for dynamic update of the label text. Click the ... button to open the Edit Expression dialog for easier editing of long formulas. For more information, see Expression syntax for calculated formulas
Field	Select a field from the list. The list box will contain the values of the selected field. A list box may instead display a cyclic or drill-down group. Only one field will be shown at a time, though. Such groups are created from the Document Properties: Groups dialog and will be listed with the available fields. If a drill-down group is used, selecting a single value in the list box will cause the list box to drill down and switch to the next underlying field of the group. Drilling back up can be accomplished by clicking the drill-up icon appearing in the list box caption. If a cyclic group is assigned to a list box it can be made to switch to show the next field in the group by clicking on the cycle icon appearing in the list box caption. It is also possible to go directly to any field in the group by using the Cycle-> option on the list box's object menu. Furthermore it is possible to display a calculated field in a list box. A calculated field does not come out of script execution, but is defined from an expression. The same rules applies on Calculated Dimensions. If a calculated field should be used in the list box, select <Expression> in the drop-down after which the Edit Expression dialog will open where it is possible to define the expression describing the calculated field. Use as Title By selecting this check box, the field name will be used as Title. The text <use field name> will appear in the Title edit box. Edit... This button is only available when <Expression> has been selected as a field name. The button opens the Edit Expression dialog where you can define the expression describing the calculated field. For more information, see Calculated fields.
And mode	Multiple selections within a field must be of either AND or OR type. By default, the selection is of OR type. This command toggles the logical mode by which multiple value selections are made. This menu option is disabled if the field does not satisfy certain conditions. This option is not available for calculated fields.
Show Alternatives	Toggles whether a selection directly in the active field list box is to exclude the other values of the field or not. If Show Alternatives is checked, all values except the selected value will be displayed as Optional but may become excluded by association with selections in other fields. Otherwise, all other values are shown as excluded by default. This option is not available for calculated fields.
Hide Excluded	Toggles whether the excluded values of the field should be shown or not. Excluded values become unselectable as well.
Read Only	Checking this option will prevent you from making selections in the list box. However, it will still reflect selections made elsewhere in the document.
Always One Selected Value	Checking this option assures that only one value can be selected, which is useful in documents where the data only makes sense when one value is already selected, such as one currency rate. This option is enabled after one value is already selected in the list box. This option is not available for calculated fields. Information noteEnabling this option modifies the data model. As a result, existing bookmarks may stop working even if you retain the same field names.
Override Locked Field	Checking this option enables selections to be made in the list box even if it is locked. The list box will still be locked for selections made elsewhere in the document.
Show as TreeView	Shows the list box as a tree view. This control is only relevant if the field contains the path representation of nodes in a hierarchy. Such a field can be generated using the Path parameter of the Hierarchy prefix. For more information, see List Box Tree View
With Separator	Sets the character that should be interpreted as separator in the path used for the Tree View.
Show Frequency	Toggles the status for whether the frequency of a field value is shown or not. By frequency is meant the number of selectable combinations in which the value occurs. This option is not available for calculated fields.
In Percent	Toggles the status for whether the frequency should be shown in absolute numbers or as percentages of the total number of entries.
Alternate State	Choose one of the available states in the list. The following Alternate States are always available. Inherited: The sheets and sheet objects are always in the inherited state unless overridden by the QlikView developer. This setting is inherited from the object on the level above, a chart in a sheet gets the same settings as the sheet if inherited is chosen. Default state: This is the state where most QlikView usage occurs and is represented by $. The QlikView document is always in the default state.
Object ID	This is used for macro purposes. Every sheet object is assigned a unique ID. We recommend that you use alphanumeric characters only in the ID. For list boxes, the ID starts with LB01. Linked objects share the same object ID. You may edit this ID number later on. For more information, see Internal Macro Interpreter
Include Excluded Values in Search	The drop-down list lets you choose between Yes, No or <use default> which applies the default setting as specified under User Preferences: General.
Default Search Mode	Specifies the initial default search mode to be used in text searches. The mode can always be changed on the fly by typing * or ~ as part of the search string. The following alternatives are available: Use <default>: The default as specified under User Preferences will apply. Use Wildcard Search: The initial search string will be two wildcards with the cursor between them to facilitate a wildcard search. Use Fuzzy Search: The initial search string will be a tilde (~) to denote a fuzzy search. Use Normal Search: No additional characters will be added to the search string. Without wildcards, a Normal Search will be made. Use Associative Search: Associative search will be used in the search box. For more information, see Search
Print Settings	Here you set the print settings for the print job.
Print All Values	The normal print behavior for list boxes is to print only possible values. By marking this check box, all values (also excluded values) will be printed.
Layout Dependent Print	By marking this check box, the list box will be printed as it appears on the screen in terms of multiple columns, selection color coding of cells etcetera. This may be useful e g when including list boxes in reports.

Calculated fields

When a calculated field is used, some list box functionality will be different from regular field list boxes. Some property options are not available (see below). Furthermore statistics boxes cannot be created from such list boxes.

A calculated field must always be a transformation of one or more normal fields. Purely synthetic calculated fields created via the valuelist and valueloop functions are not permitted. When making selections in a calculated field, you actually make selections in the underlying normal field(s). When using more than one field as base for a calculated field, the logical implications of selections in the base fields or the calculated field may be quite complex.

The use of calculated fields in list boxes may cause performance issues with very large data sets.

Expressions

On the Expressions tab you define expressions to be displayed in the list box. Each expression will be placed in a new column in the list box. The upper left corner of the dialog contains a list of the expressions.

Expression data can also be dynamically formatted by means of attribute expressions. Click on the expansion icon in front of any expression to display the expression’s attribute expressions.

You may choose to use any number and combination of attribute expressions on a given base expression. Formatting defined by means of attribute expression supersede default formatting of the data plots in terms of color etc.

Expression commands
Command	Description
Add	By clicking this button, you get to the Edit Expressions dialog, in which it is possible to create new expressions. This option is also available in the context menu that appears when right-clicking on an expression in the list of expressions.
Delete	Deletes the selected expression. The option is also available in the context menu that appears when right-clicking on an expression in the list of expressions.
Copy	The option is only available in the context menu that appears when right-clicking on an expression in the list of expressions. When using this command on a main expression, all data and settings associated with the expression (including label) will be copied to the clipboard as a piece of xml. The expression may then be pasted back into the same object or into any other QlikView object in the same or another document. If you use the command on an attribute expression, only the attribute expression definition will be copied. An attribute expression may then be pasted onto any main expression in the same or another object.
Export...	The option is only available in the context menu that appears when right-clicking on a main expression in the list of expressions. When using this command on a main expression, all data and settings associated with the expression (including label) may be exported to an xml file. The expression may then be imported back into the same chart or into any other QlikView chart in the same or another document. The command opens the Export Expression as dialog from which you can choose the destination of the export file. The file will receive an extension, for example xml.
Paste	The option is only available in the context menu that appears when right-clicking in the list of expressions and only if an expression has previously been copied to the clipboard. If a main expression has previously been copied to the clipboard, you may paste it into the blank area in the list of expressions, creating a new expression identical to the copied one. If an attribute expression has been copied, you may paste it onto a main expression.
Import...	The option is only available in the context menu that appears when right-clicking in the blank area in the list of expressions. The command opens a dialog where you can browse to previously exported expressions. The imported expression will appear as a new main expression in the chart.
Promote	Promotes the selected expression one step up in the list. Use this button if you want to change the order of the expressions.
Demote	Demotes the selected expression one step down in the list. Use this button if you want to change the order of the expressions.
Null Symbol	The symbol entered here will be used for displaying NULL values in the table.
Missing Symbol	The symbol entered here will be used for displaying missing values in the table.
Enable	Marking this check box will enable the selected expression. If the box is not marked, the expression will not be used at all.
Definition	Shows the composition of the selected expression. It is possible to edit the expression directly in this box. By clicking the … button the full Edit Expressions dialog is opened.
Show	If Always is selected, the expression will always be shown in an extra column in the list box. If Conditional is selected, the expression will be dynamically shown or hidden depending on the value of a condition expression entered in the edit box to the right.
Alignment	In this group, the default alignment of your expressions can be set. Text and numbers can be individually set to left-adjusted, centered or right-adjusted.
Display Options	This group defines what will be written in the list box expression cells.
Representation	The following alternatives are given: Text:When selecting this option the expression values will always be interpreted and displayed as text. Image: When selecting this option QlikView will try to interpret each expression value as a reference to an image. The reference may be a path to an image file on disk (e.g. C:\Mypic.jpg) or inside the QlikView document (e.g. qmem://<Name>/<Peter>). If QlikView cannot interpret an expression value as a valid image reference, the value itself will be displayed. Circular Gauge: When selecting this option QlikView will display the expression value in a circular style gauge. The gauge chart will be inscribed in the available table cell. The visual settings for the gauge can be modified via the Gauge Settings... button. Linear Gauge: When selecting this option QlikView will display the expression value in a horizontal linear style gauge. The gauge chart will be inscribed in the available table cell. The visual settings for the gauge can be modified via the Gauge Settings... button. Traffic Light Gauge: When selecting this option QlikView will display the expression value in a horizontal traffic light style gauge. The gauge chart will be inscribed in the available table cell. The visual settings for the gauge can be modified via the Gauge Settings... button. LED Gauge: When selecting this option QlikView will display the expression value in a LED style gauge. The gauge chart will be inscribed in the available table cell. The visual settings for the gauge can be modified via the Gauge Settings... button. Mini Chart: When selecting this option QlikView will display the expression value in a miniature chart with the expression aggregated over an extra dimension. The chart will be inscribed in the available table cell. The mini chart dimension can be defined and visual settings for the chart can be modified via the Mini Chart Settings button (see below). Information noteThe mini chart will not be displayed when exporting to Excel.
Gauge Settings...	Only available when one of the gauge options has been selected above. Opens a dialog for setting the properties of the gauge. This dialog is essentially equal to the Chart Properties: Presentation dialog for gauge charts.
Mini Chart Settings	Only available when Mini Chart has been selected as Display Option for an expression in the table. Opens a dialog for setting the properties of the mini chart.
Image Formatting	Only available when the image options have been selected above. This setting describes how QlikView formats the image to fit in the cell. There are four alternatives. No Stretch: If this option is selected, the image will be shown as is, without any stretching. This may cause parts of the picture to be invisible or only part of the cell to be filled. Fill: If this option is selected, the image will be stretched to fit the cell without bothering about keeping the aspect ratio of the image. Keep Aspect: If this option is selected, the image will be stretched as far as possible to fill the cell while keeping the aspect ratio. This typically results in areas either on both sides of or above and below which are not filled by the image. Fill with Aspect: If this option is selected, the image will be stretched to fill the cell in both directions while keeping the aspect ratio. This typically results in cropping of the image in one direction. Hide Text When Image Missing: If this option is selected, QlikView will not display the field value text if interpretation as an image reference fails for some reason. The cell will then be left blank.

Mini chart settings

Only available when the Mini Charts option has been selected in the Expressions page of a straight table's Properties dialog. Opens a dialog for setting the properties of the mini chart.

Mini chart properties
Property	Description
Dimension	Choose the dimension for which the expression should be plotted.

Appearance

Appearance properties
Property	Description
Mode	Set the mini chart as sparklines, line with dots, dots, bars or whiskers.
Color	Opens the Color Area dialog where the color of the mini chart can be set.
Highlight Max Value With Color	Mark the check box and click on the colored button to open the Color Area dialog where the color for the maximum value can be set.
Highlight Min Value With Color	Mark the check box and click on the colored button to open the Color Area dialog where the color for the minimum value can be set.
Highlight Start Values With Color	Mark the check box and click on the colored button to open the Color Area dialog where the color for the start values can be set. Not available for Bars and Whiskers.
Highlight End Values With Color	Mark the check box and click on the colored button to open the Color Area dialog where the color for the end values can be set. Not available for Bars and Whiskers.
Set Default Colors	Sets the colors for the highlight settings to QlikView default colors.
Force Zero Based Scaling	Fixes the lower edge of the chart to zero on the axis. Not available for Whiskers.
Force Shared Scale for Y-Axis	Forces all cells in the column to use the same y-axis scale.

Sort

You reach the Sort tab by right-clicking a sheet object (List Box, Multi Box, Table Box, Chart or Slider/Calendar object) and choosing Properties from the float menu (or Object, Properties in the main menu). Here you set the sort order of the values in the sheet object. Some sort options may not be available for some sheet objects.

Sort options
Sort by:	Result
State	Sorts the field values according to their logical state (selected, optional or excluded). The Auto Ascending setting sorts the list box (or, in a multi box, the drop-down list containing the field values) according to State only if the list box contains a vertical scroll bar. However, if you enlarge the list box to show all values, the sort order State is completely switched off. Information note Do not use Auto Ascending order in a list box inside a Container object.
Expression	Sorts the field values according to the expression entered into the text edit box below this sort option. If using sort by expression, an alternative set of records must be defined by a set expression, as the expression is calculated on selected/possible values in the list and the sort only would apply to selected/possible values in the list. Information note Sort by expression only works with numeric fields, and not with text fields. Set analysis and set expressions
Frequency	Sorts the field values by frequency (number of occurrences in the table).
Numeric Value	Sorts the field values by numeric value.
Text	Sorts the field values in alphabetical order.
Load Order	Sorts the field values by the initial load order.

The Default button sort order sets the default sort order.

The order of priority is State, Expression, Frequency, Numeric Value, Text, Load Order. Each of these sort criteria can be set to Ascending or Descending.

Presentation

The List Box Properties: Presentation tab is opened by right-clicking on a list box and choosing the Properties command in the float menu. Here it is possible to adjust the layout of the list box cells.

In the Image Options group you can let a field value comprising a reference to an image in memory or on disk be interpreted as that image:

Under Representation you can choose between Text (default), Image and Info as Image.

When you select Image, QlikView will attempt to interpret each field value as a reference to an image. The reference may be a path to an image file on disk (e.g. C:\Mypic.jpg) or inside the qvw document itself (e.g. qmem://<Name>/<Peter>). If QlikView cannot interpret a field value as a valid image reference, the value itself will be displayed, unless the Hide Text When Image Missing box is checked.

When you select Info as Image, QlikView will display image info linked to the field value via info load/info select in the script. If no image info is available for a field value, the value itself will be displayed, unless the Hide Text When Image Missing box is checked.

Provided that either image option is selected, the settings under Image Formatting can be used for fitting the image into the cell.

Image formatting options
Option	Description
No Stretch	The image is displayed as is, which may cause masking problems.
Fill	The image is stretched in order to fill the cell, without regard to aspect ratio.
Keep Aspect	The image is stretched as far as possible while retaining the correct aspect ratio.
Fill with Aspect	The image is stretched as far as possible while retaining the correct aspect ratio. Areas not covered are then filled by cropping of the image.

When images are shown instead of text it may be necessary to use another selection style than the document default so that the logical state of the field values remains visible. Use the drop-down list under Selection Style Override to select a suitable selection style, e.g. Corner Tag.

List box presentation options
Option	Description
Single Column	With this option checked, the list box field values will always be presented in a single column.
Suppress Horizontal Scroll Bar	Check this option to suppress the horizontal scroll bar that is normally displayed when field values are too wide to for the specified width of the list box. Instead, field values will be truncated as needed.
Fixed Number of Columns	Check this option to set a fixed number of columns for the list box. The option is unavailable when Single Column is selected.
Order by Column	In list boxes with more than one column, values are displayed row-wise in the sort order specified. The Order by column option switches to column-wise display.
Cell Borders	The field values will be separated by horizontal lines, resembling the rows of a table. Cell Borders is automatically activated when the Wrap Cell Text option is checked, but may be subsequently deactivated.
Highlight Search Substring	The search string entered in a search object so far will be highlighted in the matches.
Background...	Opens the Background Settings dialog.
Alignment	Here you set the alignment of field values in the list box. The alignment of Text and Numbers is set separately.
Multiline Settings	In this group the list box cells may be set to display values in multiple rows, which is useful for long text strings. Wrap Cell Text With this option selected, a cell will display its contents in more than one row. Height n Lines Here the desired limits to the number of cell rows are specified.

Background Settings

Background settings
Setting	Description
Color	If this setting is enabled the background of the object will be colored. Choose a color by clicking on the Color button.
Color Transparency	Only available when the color option has been enabled. Sets the transparency of the background color.
Image	If this setting is enabled, the background of the object will be an image. Click Browse to choose an image. Click Remove to remove it from the background.
Image Stretch	Only available when the image option has been enabled. The setting describes how QlikView formats the image to fit. No Stretch: The image will be shown as is, without any stretching. This may cause parts of the image to be invisible or only fill part of the background. Fill: The image will be stretched to fit the background without keeping the aspect ratio of the image. Keep Aspect: The image will be stretched as far as possible to fill the background while keeping the aspect ratio. Fill with Aspect: If this option is selected, the image will be stretched to fill the background in both directions while keeping the aspect ratio. This typically results in cropping of the image in one direction.
Horizontal Alignment	Only available when the image option has been enabled. Aligns the image to the Left, Center or Right.
Vertical Alignment	Only available when the image option has been enabled. Aligns the image to the Top, Center or Bottom.
Image Transparency	Only available when the image option has been enabled. Sets the transparency of the background image.

Number

The Properties: Number page is opened by right-clicking a sheet object and choosing the Properties command from the float menu.

Each field has a default number format which can be set in the Document Properties: Number page. It is however possible to use a separate number format for an individual sheet object. To do this, check the alternative Override Document Settings and specify a number format in the group control below. This property page applies to the active object and contains the following controls for formatting values:

Number formats
Format	Description
Mixed	Both numbers and text. Numbers shown in original format.
Number	Shows numeric values with the number of digits set in the Precision spinner box.
Integer	Shows numeric values as integers.
Fixed to	Shows numeric values as decimal values with the number of decimal digits set in the Decimals spinner box.
Money	Shows values in the format set in the Format Pattern edit box. An example of this format is shown in the Preview text box. The default format is the Windows Currency setting.
Date	Shows values that can be interpreted as dates in the format set in the Format Pattern edit box. An example of this format is shown in the Preview text box.
Time	Shows values that can be interpreted as time in the format set in the Format Pattern edit box. An example of this format is shown in the Preview text box.
Timestamp	Shows values that can be interpreted as date + time in the format set in the Format Pattern edit box. An example of this format is shown in the Preview text box.
Interval	Shows time as sequential time increment (e.g. format = mm shows the value as the number of minutes since calendar start ( 1899:12:30:24:00).
Show in Percent (%)	This check box affects the following formats: Number, Integer and Fixed.

Decimal and Thousand separators can be set in the edit boxes of the Separators group.

The ISO button uses the ISO standard for the formatting of date, time and timestamp.

The System button applies the settings of the system to the formatting.

The Change Document Format button opens the Document Properties: Number page where the default number format of any field can be edited.

Font

Here the Font, Font style and Size of the font to be used can be set.

The font can be set for any single object (Object Properties: Font), or all objects in a document (Apply to Objects on Document Properties: Font).

Further, the default document fonts for new objects can be set on Document Properties: Font. There are two default fonts:

The first default font (List Boxes, Charts, etc) is used for most objects, including list boxes and charts.
The second default font (Text Objects and Buttons) is used for buttons and text boxes, which are objects that usually need a larger font.

Finally, the default fonts for new documents can be set on User Preferences: Font.

For charts, buttons and text objects (except search objects) a font Color can also be specified. The color may Fixed or it can be dynamically Calculated from an expression. The expression must be a valid color representation, which is created using the color functions. If the result of the expression is not a valid color representation, the font color will default to black.

Color functions

Additional settings are:

Drop Shadow: If this option is checked a drop shadow will be added to the text.
Underline: If this option is checked the text will be underlined.

A sample of the selected font is shown in the preview pane.

Layout

A Layout setting will apply to the current object only, if it is made from the Object Properties page.
A Layout setting will apply to all objects of the specified type(s) in the document, if it is made from the Document Properties page.

Use Borders

Enable this setting in order to use a border around the sheet object. Specify the type of border by selecting it in the drop-down menu.

Shadow Intensity: The Shadow Intensity drop-down menu makes it possible to set the intensity of the shadow that surrounds the sheet objects. There is also the choice of No Shadow.
Border Style: The following predefined border types are available:
- Solid: A solid unicolored border.
- Depressed: Border giving the impression of depressing the sheet object from the background.
- Raised: Border giving the impression of raising the sheet object from the background.
- Walled: Border giving the impression of a wall around the sheet object.
Border Width: This option is available for all border types. The width can be specified in mm, cm, inches (", inch), pixels (px, pxl, pixel), points (pt, pts, point) or docunits (du, docunit).
Color: Click this button to open a dialog in which an appropriate base color can be chosen from the color palette for all border types.
Rainbow: Creates a rainbow colored border for all border types. The rainbow will start with the selected base color on top of the sheet object.

When Simplified is the chosen Styling Mode in Document Properties: General, there is no choice of border type, there is only the Shadow Intensity drop-down menu and the Border Width setting.

Rounded Corners

In the Rounded Corners group the general shape of the sheet object is defined. These settings allow for drawing of sheet objects ranging from perfectly circular/elliptical via super elliptical to rectangular. Rounded Corners is only available if you have selected Advanced Styling Mode in Document Properties: General.

Rounded Corners: Checking this option makes the alternatives for rounded corner shapes possible.
Corners: Corners for which the check box remains unmarked will be drawn rectangular instead.
Squareness: A variable number between 2 and 100 where 100 defines a rectangle with perfectly square corners and 2 corresponds to a perfect ellipse (a circle for a 1:1 aspect ratio). A squareness between 2 and 5 is usually optimal for achieving rounded corners.
Corner Radius: This setting determines the radius of the corners in fixed distance (Fixed) or in percent of the total quadrant (Relative (%)). This setting lets you control the extent to which the corners will be affected by the underlying general shape set under Squareness. The distance can be specified in mm, cm, inches (", inch), pixels (px, pxl, pixel), points (pt, pts, point) or docunits (du, docunit).

Layer

In the Layer group an object can be defined as residing in one of three layers:

Bottom: A sheet object with the Bottom layer property can never obscure sheet objects in the Normal and Top layers. It can only be placed on top of other sheet objects in the Bottom layer.
Normal: When created, sheet objects reside in the Normal (middle) layer. A sheet object in the Normal layer can never be obscured by sheet objects in the Bottom layer and can never obscure sheet objects in the Top layer.
Top: A sheet object in the Top layer can never be obscured by sheet objects in the Normal and Bottom layers. Only other sheet objects in the Top layer can be placed on top of it.
Custom: The Top, Normal and Bottom layers correspond to internally numbered layers 1, 0 and -1 respectively. In fact all values between -128 and 127 are accepted. Choose this option to enter a value of your choice.

Theme Maker...

Opens the Theme Maker wizard where you can create a layout theme.

Apply Theme ...

You can apply a layout theme to the object, sheet or document.

Layout Themes

Show

In the Show group it is possible to specify a condition under which the sheet object is displayed:

Always: The sheet object will always be displayed.
Conditional: The sheet object will be shown or hidden depending on a conditional function which will be evaluated continuously depending on e.g. selections etc. The sheet object will only be hidden when the condition returns FALSE.
Conditional functions

Users with Admin privileges for the document can override all show conditions by selecting Show All Sheets and Sheet Objects in Document Properties: Security. This functionality can be toggled by pressing Ctrl+Shift+S.

Document Properties: Security

Options

In the Options group, it is possible to disallow moving and resizing of the sheet object. The settings in this group are only relevant if the corresponding check boxes are enabled in Document Properties: Layout and Sheet Properties: Security.

Allow Move/Size: If this option has been deselected it will be impossible to move or resize the sheet object.
Allow Copy/Clone: If this option has been deselected it will be impossible to make a copy of the sheet object.
Allow Info: When the info function is in use an info icon will be displayed in the window caption whenever a field value has information associated to it. If you don't want the info icon to be displayed in the caption, you can uncheck this option.

Info
Size to Data: Normally the borders around all table sheet objects in QlikView will shrink when selections cause the size of the table to be less than allocated size for the sheet object. By deselecting this check box this automatic adjustment of size will be turned off leaving any surplus space blank.

Scrollbars

Various controls for changing the scrollbar layout are located in the Scrollbars group:

Preserve Scroll Position: With this setting enabled, QlikView will try to preserve the scroll position of tables and charts with a scroll bar when a selection is made in another object. The setting must be enabled in User Preferences: Objects as well. The scroll position is not preserved when you close the document.
Scroll Buttons: Sets the scroll button color. Select a color by clicking the button. Note that medium gray tones often render the best results for scroll bars. Either color can be defined as a solid color or a gradient via the Color Area dialog that opens when you click the appropriate button.
Scroll Background: Sets the scrollbar background color. Select a color by clicking the button.
Scrollbar Width: This control affects both the width and the relative size of the scrollbar symbols.
Scroll Style: Sets the scroll bar style. Select a style in the drop-down control. The Classic scroll bar style corresponds to QlikView 4/5 scroll bars. The Standard scroll bar style gives a more modern look. The third style is Light, which is a thinner, lighter bar.
The Styling Mode must be set to Advanced for the scroll bar style to be visible. This setting can be found on the General tab by opening the Settings drop-down menu and selecting Document Properties.

Apply To...: Opens the Caption and Border Properties dialog where you can set where to apply the properties that have been set on the Layout page.

Caption

A Caption setting will apply to the current object only, if it is made from the Object Properties page.
A Caption setting will apply to all objects of the specified type(s) in the document, if it is made from the Document Properties page.

On the Caption page, specify layout options that are completely different from the general layout of the object.

Show Caption: When this option has been checked a caption will be drawn at the top of the sheet object. List boxes and other "box objects" will have the option switched on by default whereas buttons, text objects and line/arrow objects will not.
Title Text: In the text box you can enter a title to be shown in the caption of the sheet object. Use the Font... button to change the caption font.

Set the colors of the caption in its different states. The settings for Active Colors and Inactive Colors can be made separately from each other.

Click the Background Color or Text Color button to open the Color Area dialog. The Background Color can be defined as a solid or a gradient color on the Color Area dialog. Text Color can be defined a Fixed or a Calculated color using color functions.

Color functions

Wrap Text: If this option is checked, the caption will be displayed in two or more rows.
Caption Height (Lines): Set the number of caption lines in this edit box.

The precise size and position of the QlikView object can be determined and adjusted by the size/position settings for the Normal or Minimized QlikView sheet object. These settings are measured in pixels:

X-pos: Sets the horizontal position of the left side of sheet object in relation to the sheet's left edge.
Y-pos: Sets the vertical position of the top side of sheet object in relation to the sheet's upper edge.
Width: Sets the width of the QlikView sheet object.
Height: Sets the height of the QlikView sheet object.

The orientation of the caption label can be altered with the Caption Alignment options:

Horizontal: The label can be horizontally aligned: Left, Centered or Right within the caption area.
Vertical: The label can be vertically aligned: Top, Centered or Bottom within the caption area.

Special Icons
Many of the object menu commands of the sheet objects can be configured as caption icons. Select commands to be shown as caption icons by marking the check box to the left of each command in the list.

Use the special caption icons with care. Too many icons will only confuse the user.

Allow Minimize: When this option has been checked a minimize icon will be displayed in the window caption of the sheet object, providing that the object is minimizable. Furthermore, this will make it possible to minimize the object by double-clicking the caption.
Auto Minimize: This option becomes available when Allow Minimize is checked. When Auto Minimize is checked for several sheet objects on the same sheet, all but one will be automatically minimized at any time. This is useful e.g. for alternately displaying several graphs in the same sheet area.
Allow Maximize: When this option has been checked a maximize icon will be displayed in the window caption of the sheet object, providing that the object is maximizable. Furthermore, this will make it possible to maximizing the object by double-clicking the caption. If both Allow Minimize and Allow Maximize are checked, double-clicking will effect minimizing of the object.
Help Text: Here you may enter a help text to be displayed in a pop-up window. The help text may be specified as a calculated formula. This option is not available at document level. Click the ... button to open the Edit Expression dialog for easier editing of long formulas.

Expression syntax for calculated formulas
Enter e.g. a description of the sheet object. A help icon will be added to the window caption of the object. When the mouse pointer is over the icon, the text will be displayed in a pop-up window.

Caption and Border Properties

In the Caption and Border Properties dialog you set to which objects in the document the caption and border properties should apply.

Apply properties to...: Mark this check box to apply the settings to other objects than the current one.
1. Choose one of the options:
  - Objects on this sheet: Applies the settings to objects on the current sheet only. Only available when this dialog is opened from the Layout page of a sheet object.
  - Objects in this document: Applies the settings to objects of the entire document.
2. Choose one of the options:
  - Only this object type: Applies the settings to all objects of this type. Only available when this dialog is opened from the Layout page of a sheet object.
  - All object types: Applies the settings to all objects.
Set as default for new objects in this document: Mark this check box to use the settings as default for all new objects in the current document. Only available when this dialog is opened from the Layout page of a sheet object.

List Box Tree View

If a field contains paths of nodes in a hierarchy, e.g. World/North America/USA/California/NapaValley, a list box can be displayed as a tree view. The tree view will show the nodes with indentation to facilitate navigation and allow the user to collapse nodes so that one row in the list box represents a branch in the hierarchy, rather than an individual node.

Selections will be made in the usual manner, and multiple selections across different levels in the hierarchy are of course supported.

A list box in tree view, with selections across multiple hierarchies.

For expanded nodes and leaves (bottom nodes) the QlikView standard color coding is used. Collapsed nodes, however, may contain a mix of different states. In such a case, the node is displayed green only if all values have been selected, gray if all values are excluded, and white in other cases. In addition, a small beacon is displayed, indicating the status of the hidden nodes.

Did this page help you?

If you find any issues with this page or its content – a typo, a missing step, or a technical error – let us know how we can improve!

Leave your feedback here