Unicom (Popkin) System Architect (SA) 10.4 to 11.4 (Encyclopedia) - Export
Bridge Requirements
This bridge:is only supported on Microsoft Windows.
requires the tool to be installed to access its SDK.
Bridge Specifications
| Vendor | UNICOM Systems |
| Tool Name | System Architect (SA) |
| Tool Version | 10.4.23 to 11.4.5 |
| Tool Web Site | http://unicomsi.com/products/system-architect/ |
| Supported Methodology | [Data Modeling] Data Store (Logical Data Model), Graphical Layout via COM API |
SPECIFICATIONS
Tool: UNICOM Systems / System Architect (SA) version 10.4.23 to 11.4.5 via COM API
See http://unicomsi.com/products/system-architect/
Metadata: [Data Modeling] Data Store (Logical Data Model), Graphical Layout
Component: PopkinSaEncy version 11.2.0
OVERVIEW
This bridge uses the System Architect COM/OLE Automation interface to connect to the tool, System Architect needs to be installed locally in order to have this bridge running.
REQUIREMENTS
WARNING: This bridge uses the COM API of a Windows based tool client and/or SDK which must be (a) properly installed, (b) licensed on behalf of a Windows user capable of running this tool, and (c) capable of accessing the tool server content. In addition:
(1) As recommended by the tool vendor, the tool server must NOT be installed/coexist on the same machine where the tool client (and the bridge) is installed/running because of potential conflicts of resources, including with respect to COM API.
(2) Windows COM API based tools are notoriously unstable after repeated failures or lack of system resources, which requires a Windows reboot to make that tool COM API work properly again.
(3) If this bridge is running as an application, then it must be logged with the same above Windows user.
If the bridge is running as a Windows service, then go to the services manager of Windows, right-click on the MIMB Application Server service, and go to the "Log On" tab to define an account by name under which the service will run.
FREQUENTLY ASKED QUESTIONS
Q: What types of diagrams does this bridge support?
A: This bridge supports Entity Relationship diagrams of Project Data Models.
Q: Does this bridge support the update of a Project Data Model?
A: No, if a data model with the same name already exists in the encyclopedia, the conversion process will not work. However you can use the 'Project Data Model name' bridge option to specify another name.
Q: On large models, this bridge does not respond until I respond to the following message: "The size of the undo file is too small for this diagram. Would you like to enlarge it to allow continued undoing?"
A: As the Telelogic bridge is API based, the Telelogic application may require interaction from the user. Please refer to Telelogic's documentation on how to eliminate some of these dialog boxes. In the case of this particular dialog, the undo file size can be set via Tools->preferences. The Undo file size is a numeric value; the maximum file size is 10M, and the default file size is 128K (when System Architect is initially installed).
Q: The export data model failed. This model worked in version 10.1.
A: Verify that the value in the connection name is correctly entered. The connection name in version 10.4 and greater is managed by the SA connection manager. In prior versions the connection name was the same name as the udl file.
Q: Some of my subject areas were not exported.
A: Your source model subject areas will not be exported, if there is a subject area with the same name in the SA encyclopedia.
Q: What are the required configuration steps when running this bridge as a Windows service?
A: This bridge interacts with System Architect via its COM based API which may have to display messages on the desktop. Therefore, if this bridge is running within a server launched as a Windows service (rather than a classic Windows desktop application), click on the 'Properties' menu of such service, go to the 'Log On' tab, select 'This account' and specify the same username and password used as Windows session when testing connectivity from System Architect to the encyclopedia, and restart the Windows service.
System Architect (SA) stores connection configuration files in the local user area. Therefore, if this bridge is running within a server launched as a Windows service (rather than a classic Windows desktop application), then such files must be available to the current user. In this case, running System Architect (SA) logged as 'JohnSmith' will store the connection files in:
Windows XP: 'C:\Documents and Settings\JohnSmith\Local Settings\Application Data\Telelogic\System Architect\Connections\*'
Windows 7: 'C:\Users\JohnSmith\AppData\Local\Telelogic\System Architect\Connections\*'
Q: Why does this bridge tries to export to a different Encyclopedia than specified in the parameters?
A: System Architect allows one to specify a default Encyclopedia to be opened at startup. In the 'File'->'Open' menu, the checkbox 'Open this encyclopedia at startup' should not be checked. If this checkbox is checked, it may interfere with proper bridge execution, and that encyclopedia will be used for the export. Therefore please uncheck that checkbox in the System Architect UI before exporting.
LIMITATIONS
Refer to the current general known limitations at https://www.metaintegration.com/Products/MIMB/Help/#!Documents/mimbknownlimitations.html
The System Architect API may not be completely installed by the Telelogic installer. To make sure the API is properly installed, please type the following command lines in a DOS window:
cd c:\Program Files\Telelogic\System Architect Suite\System Architect Suite\System Architect
sa2001.exe /regserver
This setup is required for Telelogic version 10.0.14 and all older versions.
SUPPORT
Provide a troubleshooting package with debug log. Debug log can be set in the UI or in conf/conf.properties with MIR_LOG_LEVEL=6
Bridge Parameters
| Parameter Name | Description | Type | Values | Default | Scope |
| Connection name | Connection name to connect to the encyclopedia database. In SA 10.4 and greater, the connection name is defined within the SA connection manager. Note: Sometimes, the connection name required here will be different from what you see in the SA Enterprise Manager. To determine the required name: 1. Start System Architect 2. Select Open 3. Select Open Encyclopedia... 4. Look at the two columns called 'Name' and 'Located on Connection' 5. Use the value in the 'Located on Connection' column for this bridge parameter. Please refer to the Frequently Asked Questions in this bridge tooltip for the default Encyclopedia setting. |
STRING | Mandatory | ||
| Encyclopedia name | Specify here the encyclopedia name to connect to. Note: Sometimes, the encyclopedia name required here will be different from what you see in the SA Enterprise Manager. To determine the required name: 1. Start System Architect 2. Select Open 3. Select Open Encyclopedia... 4. Look at the two columns called 'Name' and 'Located on Connection' 5. Use the value in the 'Name' column for this bridge parameter. Please refer to the Frequently Asked Questions in this bridge tooltip for the default Encyclopedia setting. |
STRING | Mandatory | ||
| Project Data Model name | Customize the name of the Project Data Model that will be created. If this option value is empty, this bridge will use the Model name (as defined by the source tool) instead. In SA 10.4 and greater, the project data model name must be defined, if the encyclopedia already includes any data models. |
STRING | |||
| Close System Architect | Close System Architect after exporting the model. By default the tool will not be closed |
BOOLEAN | False |
Bridge Mapping
| Meta Integration Repository (MIR) Metamodel (based on the OMG CWM standard) |
"Unicom (Popkin) System Architect (SA) 10.4 to 11.4 (Encyclopedia)" Metamodel PopkinSa |
Mapping Comments |
| Association | Relationship, Non-specific relation | |
| Aggregation | Identifying | |
| Description | Description | |
| Name | Name | |
| AssociationRole | Relationship, Non-specific relation | |
| ExtraConstraint | Delete, Update, Insert Rule | |
| Multiplicity | From Cardinality, To Cardinality, Allow Nulls | |
| Name | Name, Reverse Phrase | |
| Source | determine the order of the relationship | |
| AssociationRoleNameMap | All Foreign Key Components | |
| Name | Role Name | |
| Attribute | Attribute/Data Element | |
| Comment | Database Comment | |
| Description | Description | |
| InitialValue | Default Value | |
| Name | Name | |
| Optional | Default Nullity | |
| PhysicalName | Column name | |
| Position | determine the order of the attribute in the entity (Description) | |
| BaseType | Data Domain, Attribute, Data Element | |
| DataType | SQL Data Type | See datatype conversion array |
| Name | Name | |
| CandidateKey | Access Path | |
| Name | Name | |
| UniqueKey | Unique | |
| Class | Entity | |
| Comment | Database Comment | |
| Description | Business Description | |
| Name | Name | |
| PhysicalName | Table Name | |
| ClassDiagram | Subject Area | |
| Description | Description | |
| Name | Name | |
| DataType | SQL Data Type | See datatype conversion array |
| Description | Description | |
| InitialValue | Default Value | |
| Length | SQL Data Type Qualifier | |
| Name | Name | |
| ForeignKey | All Foreign Key Components | |
| Name | Constraint Name | Of either the Relationship or the Supersub relation |
| Generalization | Super-sub Relation | |
| Description | Description | |
| Name | Name | |
| GeneralizationRole | Super-sub Relation | |
| Index | Access Path, All Foreign Key Components | Associated with each key |
| Name | Name, Constraint Name | |
| IndexMember | Access Path, All Foreign Key Components | |
| Name | Name | |
| Position | Description | determine the order in the Description property |
| SortOrder | Description | determine the /SEQ value |
| Note | Notes | |
| Projection | Symbol | Graphical Information |
| BackgroundColor | fill color | |
| FontColor | font color | |
| Height | height | |
| LineColor | pen color | |
| Width | width | |
| X | x | |
| Y | y | |
| RelationshipProjection | Relation Symbol | Graphical Information |
| BackgroundColor | fill color | |
| FontColor | font color | |
| Height | height | |
| LineColor | pen color | |
| Width | width | |
| X | x | |
| Y | y | |
| StoreModel | Project Data Model | |
| Description | Description | |
| Name | Name |