Editing virtual proxy

You can edit an existing virtual proxy.

Do the following:

1. Select Virtual proxies on the QMC start page or from the StartS drop-down menu to display the overview.

2. Select the virtual proxy that you want to edit and click Edit in the action bar. You can only edit virtual proxies for one proxy at a time.

3. Edit the properties in the Virtual proxy edit window:

   Identification

   The Identification property group contains the basic virtual proxy properties in the Qlik Sense system.

   All fields are mandatory and must not be empty.

   Property	Description	Default value
   Description	The description of the virtual proxy.	Blank
   Prefix	The path name in the proxy’s URI that defines each additional path. Example: https://[node]/[prefix]/ You can only use characters that can be part of a URI path. You can use slashes (/), but the prefix cannot begin nor end with a slash. Hash signs (#) cannot be used. Uniform Resource Identifier (URI): Generic Syntax	Blank
   Session inactivity timeout (minutes)	The maximum period of time with inactivity before timeout. After this, the session is invalid and the user is logged out from the system.	30 minutes
   Session cookie header name	The name of the HTTP header used for the session cookie. This value is blank by default and you must enter a value. Tip noteIt can be useful to include the value of the Prefix property above as a suffix in the cookie name.	Blank

   Authentication

   The Authentication property group contains the authentication method properties for the virtual proxies in the Qlik Sense system.

   Property	Description	Default value
   Anonymous access mode	How to handle anonymous access: No anonymous user Allow anonymous user Always anonymous user	No anonymous user
   Authentication method	Ticket: a ticket is used for authentication. Header authentication static user directory: allows static header authentication, where the user directory is set in the QMC. Header authentication dynamic user directory: allows dynamic header authentication, where the user directory is fetched from the header. SAML: SAML2 is used for authentication.	Ticket
   Header authentication header name	The name of the HTTP header that identifies users, when header authentication is allowed. Mandatory if you allow header authentication (by selecting either Header authentication static user directory or Header authentication dynamic user directory for the Authentication method property). Information noteHeader authentication only supports US-ASCII (UTF-8 is not supported).	Blank
   Header authentication static user directory	The name of the user directory where additional information can be fetched for header authenticated users. Mandatory if you allow static header authentication (by selecting Header authentication static user directory for the Authentication method property).	Blank
   Header authentication dynamic user directory	Mandatory if you allow dynamic header authentication (by selecting Header authentication dynamic user directory for the Authentication method property). The pattern you supply must contain ‘$ud’, ‘$id’ and a way to separate them. Example setting and matching header: $ud\\$id – matches USERDIRECTORY\userid (backslashes must be escaped with an additional \) $id@$ud – matches userid@USERDIRECTORY ($id and $ud can be in any order) $ud:::$id – matches USERDIRECTORY:::userid	Blank
   Windows authentication pattern	The chosen authentication pattern for logging in. If the User-Agent header contains the Windows authentication pattern string, Windows authentication is used. If there is no matching string, form authentication is used.	Windows
   Authentication module redirect URI	When using an external authentication module, the clients are redirected to this URI for authentication.	Blank (default module, that is Windows authentication Kerberos/NTLM)
   SAML host URI	The server name that is exposed to the client. This name is used by the client for accessing Qlik services, such as the QMC. The server name does not have to be the same as the machine name, but in most cases it is. You can use either http:// or https:// in the URI. To be able to use http://, you must select Allow HTTP on the edit page of the proxy that the virtual proxy is linked to. Mandatory if you allow SAML authentication (by selecting SAML for the Authentication method property).	Blank
   SAML entity ID	ID to identify the service provider. The ID must be unique. Mandatory if you allow SAML authentication (by selecting SAML for the Authentication method property).	Blank
   SAML metadata IdP	The metadata from the IdP is used to configure the service provider, and is essential for the SAML authentication to work. A common way of obtaining the metadata is to download it from the IdP website. Click the browse button and open the IdP metadata .xml file for upload. To avoid errors, you can click View content and verify that the file has the correct content and format. The configuration is incomplete without metadata.
   SAML attribute for user ID	The SAML attribute name for the attribute describing the user ID.Name or friendly name can be used to identify the attribute. See: I do not know the name of a mandatory SAML attribute	Blank
   SAML attribute for user directory	The SAML attribute name for the attribute describing the user directory. Name or friendly name can be used to identify the attribute.If the name value is enclosed in brackets, that value is used as a constant attribute value: [example] gives the constant attribute value 'example'. See: I do not know the name of a mandatory SAML attribute	Blank
   SAML attribute mapping	Click Add new attribute to map SAML attributes to Qlik Sense attributes, and define if these are to be required by selecting Mandatory. Name or friendly name can be used to identify the attribute.If the name value is enclosed in brackets, that value is used as a constant attribute value: [example] gives the constant attribute value 'example'.

   Load balancing

   The Load balancing property group contains the load balancing properties for the virtual proxies in the Qlik Sense system.

   Property	Description	Default value
   Load balancing nodes	Click Add new server node to add load balancing to that node.	Blank

   Advanced

   The Advanced property group contains the advanced properties for the virtual proxies in the Qlik Sense system.

   Property	Description	Default value
   Extended security environment	Enabling this setting will send the following information about the client environment in the security header: OS, device, browser, and IP. If not selected, the user can run the same engine session simultaneously on multiple devices.	Blank
   Session cookie domain	By default the session cookie is valid only for the machine that the proxy is installed on. This (optional) property allows you to increase its validity to a larger domain. Example: company.com	Blank (default machine)
   Additional response headers	Headers added to all HTTP responses back to the client. Example: Header1: value1 Header2: value2	Blank
   Websocket origin white list	All values added here are validated starting from the bottom level. If, for example, domain.com is added, this means that all values ending with domain.com will be approved. If subdomain.domain.com is added, this means that all values ending with subdomain.domain.com will be approved.	Blank

   Integration

   The Integration property group contains the integration properties for the virtual proxies in the Qlik Sense system.

   Property	Description	Default value
   Session module base URI	The address to an external session module, if any.	Blank (default module, that is in memory)
   Load balancing module base URI	The address to an external load balancing module that selects which Qlik Sense engine to use for the user’s session, if any.	Blank (default module, that is round robin)

   Tags

   The Tags property group contains the available QMC tags in the Qlik Sense system.

   Property	Description
   Tags	Information noteIf no QMC tags are available, this property group is empty. Click the text box to be display a list of the available QMC tags. Start typing to reduce the list. Connected tags are displayed under the text box.

   Custom properties

   The Custom properties property group contains the custom properties in the Qlik Sense system. When a custom property has been activated for a resource, you can use the drop-down to select a custom property value.

   Property	Description
   Custom properties	If no custom properties are available, this property group is not displayed at all (or displayed but empty) and you must make a custom property available for this resource type before it will be displayed here.

4. Click Apply to save your changes. If a mandatory field is empty, Apply is disabled.

5. Edit the fields under Associated items.

   Proxies

   Node	The proxy name.
   Status	One of the following statuses is displayed: Running The service is running as per normal. Stopped The service has stopped. Disabled The service has been disabled. Tip noteClick ] in the Status column for more detailed information on the status. See: Checking the status of Qlik Sense services.
   Service listen port HTTPS (default)	The secure listen port for the proxy, which by default manages all Qlik Sense communication. Information noteMake sure that port 443 is available for the Qlik Sense Proxy Service (QPS) to use because the port is sometimes used by other software, for example, web servers.
   Allow HTTP	Status values: Yes or No. Yes: Unencrypted communication is allowed. This means that both https (secure communication) and (http) unencrypted communication is allowed.
   Service listen port HTTP	The unencrypted listen port, used when HTTP connection is allowed.
   Authentication listen port HTTPS (default)	The secure listen port for the default (internal) authentication module.
   Kerberos authentication	Status values: Yes or No. Yes: Kerberos authentication is enabled.
   Authentication listen port HTTP	The unencrypted authentication listen port, used when HTTP connection is allowed.
   SSL browser certificate thumbprint	The thumbprint of the Secure Sockets Layer (SSL) certificate that handles the encryption of traffic from the browser to the proxy.
   Keep-alive timeout (seconds)	The maximum timeout period for a single HTTP request before closing the connection. Protection against denial-of-service attacks. This means that if an ongoing request exceeds this period, Qlik Sense proxy will close the connection. Increase this value if your users work over slow connections and experience closed connections.
   Max header size (bytes)	The maximum total header size.
   Max header lines	The maximum number of lines in the header.
   Audit activity log level	Levels: Off or Basic (a limited set of entries)
   Audit security log level	Levels: Off or Basic (a limited set of entries)
   Service log level	Each level from Error to Info includes more information than the previous level.
   Audit log level	More detailed, user-based messages are saved to this logger, for example, proxy calls. Each level from Fatal to Debug includes more information than the previous level.
   Performance log level	All the performance messages are saved to this logger. For example, performance counters and number of connections, streams, sessions, tickets, web sockets and load balancing information. Each level from Fatal to Debug includes more information than the previous level.
   Security log level	All the certificates messages are saved to this logger. Each level from Fatal to Debug includes more information than the previous level.
   System log level	All the standard proxy messages are saved to this logger. Each level from Fatal to Debug includes more information than the previous level.
   Performance log interval (minutes)	The interval of performance logging.
   REST API listen port	The listen port for the proxy API.
   ID	The ID of the proxy.
   Created	The date and time when the proxy was created.
   Last modified	The date and time when the proxy was last modified.
   Modified by	By whom the proxy was modified.
   <Custom properties>	Custom properties, if any, are listed here.
   SR	Sort the list ascending or descending. Some columns do not support sorting.
   .	You can combine filtering with searching. Searching and filtering in the QMC
   Edit	Click Edit in the action bar and edit the selected proxy.
   Unlink	Click to unlink a proxy service from the selected proxy. Information noteA virtual proxy must be linked to a proxy service in order to work.
   P Link	Click to link a proxy service to the selected proxy.
   Show more items	The overview shows a set number of items by default. To show more items, scroll to the end of the list and click Show more items. Sorting and filtering of items is always done on the full database list of items, not only the items that are displayed.

6. Click Apply in the action bar to save your changes.

   Successfully updated is displayed at the bottom of the page.

You now have edited a virtual proxy.