Skip to main content Skip to complementary content

Combining tables with Join and Keep

A join is an operation that uses two tables and combines them into one. The records of the resulting table are combinations of records in the original tables, usually in such a way that the two records contributing to any given combination in the resulting table have a common value for one or several common fields, a so-called natural join. In Qlik Sense, joins can be made in the script, producing logical tables.

It is possible to join tables already in the script. The Qlik Sense logic will then not see the separate tables, but rather the result of the join, which is a single internal table. In some situations this is needed, but there are disadvantages:

  • The loaded tables often become larger, and Qlik Sense works slower.
  • Some information may be lost: the frequency (number of records) within the original table may no longer be available.

The Keep functionality, which has the effect of reducing one or both of the two tables to the intersection of table data before the tables are stored in Qlik Sense, has been designed to reduce the number of cases where explicit joins need to be used.

Information noteIn this documentation, the term join is usually used for joins made before the internal tables are created. The association made after the internal tables are created, is however essentially also a join.

Joins within a SQL SELECT statement

With some ODBC drivers it is possible to make a join within the SELECT statement. This is almost equivalent to making a join using the Join prefix.

However, most ODBC drivers are not able to make a full (bidirectional) outer join. They are only able to make a left or a right outer join. A left (right) outer join only includes combinations where the joining key exists in the left (right) table. A full outer join includes any combination. Qlik Sense automatically makes a full outer join.

Further, making joins in SELECT statements is far more complicated than making joins in Qlik Sense.

Example:  

SELECT DISTINCTROW

[Order Details].ProductID, [Order Details].

UnitPrice, Orders.OrderID, Orders.OrderDate, Orders.CustomerID

FROM Orders

RIGHT JOIN [Order Details] ON Orders.OrderID = [Order Details].OrderID;

This SELECT statement joins a table containing orders to a fictive company, with a table containing order details. It is a right outer join, meaning that all the records of OrderDetails are included, also the ones with an OrderID that does not exist in the table Orders. Orders that exist in Orders but not in OrderDetails are however not included.

Join

The simplest way to make a join is with the Join prefix in the script, which joins the internal table with another named table or with the last previously created table. The join will be an outer join, creating all possible combinations of values from the two tables.

Example:  

LOAD a, b, c from table1.csv;

join LOAD a, d from table2.csv;

The resulting internal table has the fields a, b, c and d. The number of records differs depending on the field values of the two tables.

Information noteThe names of the fields to join over must be exactly the same. The number of fields to join over is arbitrary. Usually the tables should have one or a few fields in common. No field in common will render the cartesian product of the tables. All fields in common is also possible, but usually makes no sense. Unless a table name of a previously loaded table is specified in the Join statement the Join prefix uses the last previously created table. The order of the two statements is thus not arbitrary.

See:  Join

Keep

The explicit Join prefix in the data load script performs a full join of the two tables. The result is one table. In many cases such joins will results in very large tables. One of the main features of Qlik Sense is its ability to make associations between tables instead of joining them, which reduces space in memory, increases speed and gives enormous flexibility. The keep functionality has been designed to reduce the number of cases where explicit joins need to be used.

The Keep prefix between two LOAD or SELECT statements has the effect of reducing one or both of the two tables to the intersection of table data before they are stored in Qlik Sense. The Keep prefix must always be preceded by one of the keywords Inner, Left or Right. The selection of records from the tables is made in the same way as in a corresponding join. However, the two tables are not joined and will be stored in Qlik Sense as two separately named tables.

See:  Keep

Inner

The Join and Keep prefixes in the data load script can be preceded by the prefix Inner.

If used before Join, it specifies that the join between the two tables should be an inner join. The resulting table contains only combinations between the two tables with a full data set from both sides.

If used before Keep, it specifies that the two tables should be reduced to their common intersection before being stored in Qlik Sense.

Example:  

In these examples we use the source tables Table1 and Table2:

Inner examples source tables

Inner Join

First, we perform an Inner Join on the tables, resulting in VTable, containing only one row, the only record existing in both tables, with data combined from both tables.

VTable:

SELECT * from Table1;

inner join SELECT * from Table2;

Inner Join example

Inner Keep

If we perform an Inner Keep instead, you will still have two tables. The two tables are of course associated via the common field A.

VTab1:

SELECT * from Table1;

VTab2:

inner keep SELECT * from Table2;

Inner Keep example

See:  Inner

Left

The Join and Keep prefixes in the data load script can be preceded by the prefix left.

If used before Join, it specifies that the join between the two tables should be a left join. The resulting table only contains combinations between the two tables with a full data set from the first table.

If used before Keep, it specifies that the second table should be reduced to its common intersection with the first table before being stored in Qlik Sense.

Example:  

In these examples we use the source tables Table1 and Table2:

Left examples source tables

First, we perform a Left Join on the tables, resulting in VTable, containing all rows from Table1, combined with fields from matching rows in Table2.

VTable:

SELECT * from Table1;

left join SELECT * from Table2;

Left Join example

If we perform an Left Keep instead, you will still have two tables. The two tables are of course associated via the common field A.

VTab1:

SELECT * from Table1;

VTab2:

left keep SELECT * from Table2;

Left Keep example

See:  Left

Right

The Join and Keep prefixes in the data load script can be preceded by the prefix right.

If used before Join, it specifies that the join between the two tables should be a right join. The resulting table only contains combinations between the two tables with a full data set from the second table.

If used before Keep, it specifies that the first table should be reduced to its common intersection with the second table before being stored in Qlik Sense.

Example:  

In these examples we use the source tables Table1 and Table2:

Right examples source tables

First, we perform a Right Join on the tables, resulting in VTable, containing all rows from Table2, combined with fields from matching rows in Table1.

VTable:

SELECT * from Table1;

right join SELECT * from Table2;

Right Join example

If we perform an Left Keep instead, you will still have two tables. The two tables are of course associated via the common field A.

VTab1:

SELECT * from Table1;

VTab2:

right keep SELECT * from Table2;

Right Keep example

See:  Right

Did this page help you?

If you find any issues with this page or its content – a typo, a missing step, or a technical error – let us know how we can improve!