Charts are graphical representations of numerical data. It is possible to switch between different representations of an existing chart, by changing the Chart Type in the Chart Properties: General page.
Mekko charts present data using variable width bars. They can display up to three levels of data in a two-dimensional chart. Mekko charts are useful in such areas as market analysis.
By a right-click on the chart the Mekko Chart: Object Menu will be displayed. It can also be accessed from the Object menu, when the chart is the active object.
- GeneralQuick Chart WizardChart Properties
- Chart Properties: DimensionsPropertiesPropertiesObject
- Chart Properties: DimensionsEdit Groups
- Synthetic dimension functions
- Dimension Limits
- FirstLargest Smallest
- Chart Properties: ExpressionsPropertiesObject
- Chart Properties: SortPropertiesObject
- AscendingDescending A -> ZZ -> A
- DefaultDocument Properties: Sort
- Override Group Sort OrderDimensions
- Bar Settings
- Values on Data PointsDisplay OptionsChart Properties: Expressions
- Error Bars
- Line/Symbol Settings
- Legend Settings
- Chart Scrolling
- Reference Lines
- Reference Lines
- Text in Chart
- Chart texts
- Sizing and moving chart components
- Chart Properties: ColorsPropertiesObject
- Data Appearance
|Properties...||Opens the Properties dialog where the parameters defining the chart can be set. This command can also be invoked by the following keyboard shortcut: Alt + Enter.|
Allows creating and sharing notes about the current object.
|Detach||The chart title is appended with the text “(Detached)” and the chart is no longer updated with selections made in the document (though selections may actually still be made from the chart). The command is available only if the chart is attached. By making a copy of a chart and detaching it, you may make direct comparisons between the copy and the original.|
|Attach||Attaches a detached chart. The chart becomes dynamically linked to the data. The command is available only if the chart is detached.|
|Clone||Makes an identical copy of the chart. If a detached chart is cloned the clone will be attached.|
This cascade menu is only available when the Design Grid command of the View menu is activated or when the Always Show Design Menu Items under User Preferences: Design is checked. It contains four commands to set the layout layer of the sheet objects. Valid layer numbers are -128 to 127.
|Clear All Selections||Clears all selections in the dimensions and expressions of the chart.|
|Print...||Opens the Print dialog where print settings can be specified.|
|Print as PDF...||
Opens the Print dialog with the PDF-XChange 3.0 printer pre-selected. After pressing the Print button you will be prompted for a file name for the PDF output file. This command is only available if a PDF printer is available on the system.
|Send Values to Excel||Exports the underlying data (the straight table equivalent to the chart) to Microsoft Excel, which is automatically launched if not already running. The table will appear in a new Excel worksheet. For this functionality to work Microsoft Excel 2007 or later must be installed on the computer.|
|Export...||Opens a dialog for saving an image of the chart to file. The image can be saved as bmp, jpg, gif or png.|
|Copy to Clipboard||This menu contains the various copy options for the chart.
Copies the values to the clipboard in the form of a table.
Copies an image of the chart object to the clipboard. The image will include or exclude the sheet object caption and border depending on the settings in the User Preferences: Export page.
Copies the entire sheet object to the clipboard for pasting elsewhere in the layout or in another document opened within the current instance of QlikView.
Opens a menu with the following commands for linked objects.
|Minimize||Iconizes the object. Clicking on the icon in the object caption (if shown) produces the same result. This command is available only if minimizing is allowed in the object's Properties dialog on the Caption page.|
|Maximize||Enlarges the object to fill the sheet. Clicking on the icon in the object caption (if shown) produces the same result. This command is available only if maximizing is allowed in the object's Properties dialog on the Caption page.|
|Restore||Restores a minimized or maximized object to its previous size and location. Double-clicking the icon of a minimized object or clicking the icon in the object caption (if shown) of a maximized object produces the same result. This command is available only for minimized or maximized objects.|
|Help||Opens QlikView help.|
|Remove||Removes the sheet object from the sheet.|
title to be displayed in the window header. The title can also be defined as a calculated formula for dynamic update of the label text. Click the ... button to open the Edit Expression dialog for easier editing of long formulas.
|Show Title in Chart||
By default, the label of the first expression defined is set as chart title. Clear the check box if no chart title should be displayed. To display the original title, simply mark the check box. The title can also be defined as a calculated formula for dynamic update of the label text. Click the ... button to open the Edit Expression dialog for easier editing of long formulas. The chart title is not displayed in pivot tables or straight tables.
|Title Settings||Define advanced settings for the chart title by clicking the Title Settings button.|
Clicking the Print Settings button takes you to the Print Settings dialog where it is possible to define margins and header/footer format. The Print Settings dialog holds two pages, Print Layout and Print Header/Footer.
|Alternate State||Choose one of the available states in the list. The following Alternate States are always available.
The sheets and sheet objects are always in the inherited state unless overridden by the QlikView developer. This setting is inherited from the object on the level above, a chart in a sheet gets the same settings as the sheet if inherited is chosen.
This is the state where most QlikView usage occurs and is represented by $. The QlikView document is always in the default state.
This is used for marco purposes. Every sheet object is assigned a unique ID. We recommend that you use alphanumeric characters only in the ID. For charts, the ID starts with CH01. Linked objects share the same object ID. You may edit this ID number later on.
|Detached||If enabled, the chart will be detached, that is, it will no longer be dynamically updated when selections are made.|
|Read Only||If enabled, the chart will be read only, that is, selections cannot be made by clicking or painting with the mouse in the chart.|
|Calculation Condition||Typing an expression in this text box sets a condition that needs to be fulfilled for the chart to be displayed. If the condition is not fulfilled, the text "Calculation condition unfulfilled" will be displayed in the chart. The value may be entered as a calculated formula. Click on the ... button to open the Edit Expression dialog.|
|Chart Type||The Chart Type group is where you select the basic layout of the chart. For more information on each chart type, see Chart types.|
|Fast Type Change||In this group you can enable an icon in the chart from which the user can change chart type without going through the chart properties dialog.
In this list you select which chart types that should appear in the drop-down. Two or more types have to be chosen for fast type change to be enabled.
Preferred Icon Position
In graphical charts, the fast type change icon can be positioned either inside the chart or in the sheet object caption. In table charts, the caption is the only alternative.
|Reset User Sizing||By pressing this button, all user sizing of legend, title etc. in graphical charts will be reset. Docking of individual items will not be affected.|
|Reset User Docking||By pressing this button, all user docking of legend, title etc. in graphical charts will be reset.|
Opens the Custom Error Messages dialog.
|Reference Mode||Settings for how the reference background should be plotted when using the Set Reference option from the chart's context menu. This setting is only meaningful for some charts.|
- What do you want to look at? What should the sizes of the bars in the bar chart correspond to? The answer might be the "sum of sales", or something similar. This is set on the Expressions tab.
- What do you want to group it by? Which field values do you want to use as labels for the bars in the bar chart? The answer might be "per country", or something similar. This is set on the Dimensions tab.
Lists all fields/field groups that are available for use as dimensions
(i.e. along the x-axis in a typical bar chart). Field groups will be preceded
by a vertical arrow for drill-down groups or a curved arrow for cyclic groups. Groups are defined in the
Document Properties: Groups
page. Select the items to be used/removed by clicking them. Use the Add > or the < Remove button to move them to the desired column.
|Show System Fields||Checking this option will display the system fields in the Available Fields/Groups column.|
|Show Fields from Table||From here, you control what fields/groups appear in the Available
Fields/Groups list. The drop-down list displays the alternative
All Tables by default.
The alternative All Tables (Qualified) shows the fields qualified by the name of the table(s) they occur in. This means that key (connecting) fields will be listed more than once. (This alternative is only used for viewing purposes and has nothing to do with Qualify fields in the load script.)
It is also possible to view the fields of one table at a time. Note that available groups are always listed.
|Edit Groups...||This button takes you directly to the Document Properties: Groups page, where field groups to be used as dimensions can be defined.|
|Animate...||Opens the Animation dialog, by which you can make use of the chart's first dimension for animation. Animation is only available for bitmap charts excluding pie charts. Some functional limitations apply when using animations.|
|Trellis...||Opens the Trellis Settings dialog where you can create an array of charts based on the first dimension. Any type of bitmap chart can be made into a trellis display.|
This list contains the dimensions
currently selected to be used as dimensions in the chart. The number of
dimensions that can be used varies with the type of chart. Superfluous
dimensions for any given type will be disregarded. When used in tables, the dimension data cells can be dynamically formatted by means of attribute expressions. Whenever an attribute expression is entered for a dimension, its icon will turn from gray scale to color, or as in the case of Text Format, from gray to black. These settings will have precedence over chart settings. Click on the "+" expansion icon in front of any dimension to display the placeholders or the dimension's attribute expression.
|Add calculated dimension...||
Adds a new dimension and opens it for editing in the Edit Expression dialog. A chart dimension is often in a single field, but can also be dynamically calculated. A calculated dimension consists of an expression involving one or more fields. All standard functions may be used. Aggregation functions may not be used, but the Aggr function can be included for achieving nested aggregation.
|Edit...||Opens the dimension for editing in the Edit Expression dialog. See Add calculated dimension... above for details on calculated dimensions.|
|Settings for Selected Dimension||
In this group you find settings for individual
Suppress When Value Is
Restrict which values are displayed using the first expression
Note: Negative values will not be included when calculating the accumulated restriction sum. We recommend that you don't use relative restrictions for fields that can contain negative values.
Note: If you add a limit to a calculated dimension and the data is sorted on the same calculated dimension, the dimension limit will be applied before the sort order is applied.
Enabling this option will produce an Others segment in the chart. All dimension values that do not meet the comparison criteria for the display restrictions will be grouped into the Others segment. If there are dimensions after the selected dimension, Collapse Inner Dimensions will control whether individual values for the subsequent / inner dimensions display on the chart.
Enter the name you wish to display in the chart. If no text is entered, the label will be automatically set to the expression text. The value may be entered as a calculated formula. Click on the ... button to open the Edit Expression dialog.
The chart will display a total for the selected dimension when this option is enabled. This total behaves differently than the expression total, which is still configured on the Expressions tab of the property dialog.
Enter the name you wish to display in the chart. If no text is entered, the label will be automatically set to the expression text. The value may be entered as a calculated formula. Click on the ... button to open the Edit Expression dialog.
Global Grouping Mode
The option only applies to inner dimensions. When this option is enabled the restrictions will be calculated on the selected dimension only. All previous dimensions will be ignored. If this is disabled, the restrictions are calculated based on all preceding dimensions.
Expression Totals Compared to Dimension Totals
- What should the size of the bars etc. illustrate? These are the Expression(s) ( e.g. sum of NetSales).
- How should the data be grouped? These are the Dimension(s) ( e.g. per Country).
The Chart Properties: Sort page for straight tables holds slightly different options.
|Y-value||Dimension values will be sorted by the numeric value of the y-axis. This option is not available for calculated dimensions.|
|State||Dimension values will be sorted according to their logical state, i.e. selected values before optional values, before excluded values.|
|Expression||Dimension values will be sorted according to the expression that is entered into the text edit box below this sort option.|
|Frequency||Dimension values will be sorted according to the number of occurrences in the table.|
|Numeric Value||Dimension values will be sorted according to their numeric value.|
|Text||Dimension values will be sorted according to their alphabetical order.|
|Load Order||Dimension values will be sorted according to their initial load order.|
|Look||Choose one of the available styles. This may in some instances affect not only the appearance of the chart but also its functionality.|
|Orientation||Set the orientation of the chart, vertical or horizontal.|
|Subtype||In this group the mode is set, either Grouped or Stacked
mode for bars (Overlayed or Stacked for Radar charts. This setting
is only functional when the chart displays two dimensions or one dimension
and more than one expression. Negative values in stacked bars are stacked
separately downwards below the x-axis. For bar charts, when using continuous axes scaling, stacked layout is the only allowed layout.
For the presentation of bar charts with multiple dimensions and expressions the following principles apply:
The following table shows how subtypes are presented with multiple dimensions and expressions.
|3D View||The settings in this group define the angle from which the chart is viewed in 3D modes.
Defines the vertical angle of the 3D view. The value must be an integer between 5 and 45.
Defines the side angle of the 3D view. The value must be an integer between 5 and 45.
|Plot Color Style||This control can be used to impose a color style on all plot colors in the chart. When a style
is selected in the drop-down list all colors under Color
Map on the Colors page
will be changed to the selected style. The change is instantaneous and
the setting itself will not be saved until the next time you enter this
page of the dialog. The actual base colors in the color map are unaffected.
The Plot Color Style is not available
for all chart looks. The following options are available:
Sets all colors in the color map to solid colors.
Sets all colors in the color map to a color gradient going towards black.
Sets all colors in the color map to a color gradient going towards a darker tone.
Gives a glossy look to all bars.
|Plot Area Background Style||This control can be used to change the appearance
of the plot area background. This setting is only available for charts
with a plot area. The following options are available:
A frame is drawn around the plot area.
This option gives a shadow effect on the plot area background.
This setting removes the plot area background.
|Preview||Offers a preview of the basic visual properties of the chart.|
|Bar Distance (-6 - 8)||Sets the distance between the bars in the cluster. A negative number results in overlapping bars. Values between -6 and 8 are allowed.|
|Cluster Distance (0 - 8)||Denotes the distance between grouped values in a clustered bar chart. Values between 0 and 8 are allowed.|
|Allow Thin Bars||For charts with a non-continuous x-axis, QlikView will only display as many data points as can be accommodated in the plot area available. Remaining data points are truncated from the chart. Bars are by default drawn with a minimum width of four pixels, to make them clearly distinguishable. Check this option to allow compression of bars to a width of 1 pixel.|
|Show All Bars||For charts with a non-continuous x-axis, QlikView will only display as many data points as can be accommodated in the plot area available. Remaining data points are truncated from the chart. Check this option to force the drawing of all data points. Bars can be compressed (as for Allow Thin Bars) and some may also be partially obscured by others.|
|Max Values Shown||In this box you can specify an upper limit for the number of data points to show values for in the chart. If no limit is specified, values will be shown for all data points, which may affect the readability of the chart.|
|Vertical||Shows the values vertically.|
|Plot Values Inside Segments||Marking this check box will plot values on data points inside the segments instead of on top of them.|
|Still Show Total on Top||Marking this check box will additionally show the total value on top of each bar for a stacked bar chart. This option is only available if you have selected Plot Values Inside Segments.|
|Width||Specifies the width of error bars.|
|Thickness||Specifies the thickness of error bars.|
|Color||Sets a color for error bars.|
|Line Width||Determines the width of the line, if a line representation is specified. The value can be specified in mm, cm, inches (", inch), pixels (px, pxl, pixel), points (pt, pts, point) or docunits (du, docunit).|
|Symbol Size||Determines the size of symbols, if a symbol representation is specified.|
|Trendline Width||This setting determines the width of trendlines.|
|Use Full Symbol Set||This alternative makes more symbol representation available (rings, triangles etc.)|
|Semi-transparent||Check this option if you want filled lines to be drawn semi-transparent.|
|Pop-up Labels||Check this option to display the corresponding dimension value in a pop-up window when the mouse pointer touches a value.|
|Highlight||With this option checked, symbols and/or lines are highlighted when the mouse pointer hovers over them. Where a legend is included in the chart, the highlighting applies here as well, making it possible to single out one of several overlapping values.|
|Suppress Zero-Values||This check box eliminates
dimensions that are empty or contain only zeros. This option is selected by
Zero on Bars
This option is only applicable when Suppress Zero-Values is deselected. If the check box is marked and Values on Data Points is selected for the chart expression under Display Options in Chart Properties: Expressions, zero values will appear as text above the data points. In other cases zero values will be suppressed.
|Suppress Missing||If this check box is marked, all combinations of the dimension fields associated with only null values in all fields in all expressions will be disregarded in the calculation. This option is selected by default. Turning it off can be useful only in special cases, e.g. if you want to count null values in a chart.|
Check this alternative to include a legend in the chart (checked by default). It is possible to change the legend by clicking the Settings... button. If the chart is dimensionless, but has several expressions, unmarking this check box will show the expressions on the axis instead.
|Limit Legend (Characters)||Enable this check box to limit the length of the dimension value strings that are displayed on axes and in the chart legend. Truncated values will be followed by ... in the chart.|
|Enable X-Axis Scrollbar||Enable this check box to show a scroll control in place of the X-axis. The scroll bar can be used to scroll the selection of the X-axis values that are displayed. The number of values shown at any one time will be the number set under When Number of Items Exceeds.|
|Reversed||Checking the box displays the values in reversed order.|
|Add||Opens the Reference Lines dialog where you can create a new reference line in the chart.|
|Edit||Highlight an existing reference line in the list and click this button to edit its properties in the Reference Lines dialog.|
|Delete||Highlight an existing reference line in the list and click this button to delete it from the list.|
|Add||Opens the Chart Text dialog, where you can create a new chart text.|
|Edit||Highlight an existing text in the list and click this button to edit its properties in the Chart Text dialog.|
|Delete||Highlight an existing text in the list and click this button to delete it from the list.|
|Colors 1 - 18||Colors can be defined as solid colors or color gradients. To customize
a color, click its button to open the Color Area dialog.
The Get Default Colors button resets the color map to the default settings of QlikView.
The Undo Color Changes button returns the color settings that applied upon entry to this dialog.
The Advanced... button opens the Advanced Color Map dialog where color maps can be set and retrieved on sheet, document, user and QlikView default level.
|Multicolored||Unchecking this option results in all bars having the same color.|
|Persistent Colors||Checking this option locks the color map so that each value has a color permanently assigned to it.|
|Repeat Last Color||Checking this option assigns the 18th color in the color map to any value after the 18th value. If unchecked, colors are just repeated in succession from 1 to 18.|
In the Frame Background group color settings are made for the plot area background and the background of the area surrounding the plot area.
The chart will be plotted with a colored background. Different colors can be set for the plot area and the surrounding area.
Clicking either button opens the Color Area dialog.
Tip: The Background Color setting can be combined with the Image and/or Plot Area Only options below.
|Background||The color used for the background around the plot area or, in the case of some charts, for the entire chart background. The color can be defined as a solid color or a gradient via the Color Area dialog that opens when clicking the button. The default color is white.|
|Plot Area||The color used for the plot area of the chart. The color can be defined as a solid color or a gradient via the Color Area dialog that opens when clicking the button. The default color is light gray. This setting is unavailable for pie charts, block charts, funnel charts and radar charts.|
|Image||Select this alternative and click the Image
button to open the Select Image
dialog, where it is possible to import a background picture.
Limit the imported picture to the Plot Area Only by checking this alternative.
|Dynamic Image||Enter a calculated expression to show dynamic background images that change with the selection. Available for bar, line, combo, scatter and grid charts.|
|Transparency||Sets the degree of transparency of the chart background. At 0% the background will be completely opaque with the color defined under Background Color above. At 100% the background will be completely transparent.|
In the Plot Area Border group you can assign Width and Color for the rectangle surrounding the plot area.
This property page applies to the active chart and contains the following controls for formatting values:
|Expression Default||Shows numeric values using the number format provided by the expression.|
|Number||Shows numeric values with the number of digits set in the Precision spinner box.|
|Integer||Shows numeric values as integers.|
|Fixed to||Shows numeric values as decimal values with the number of decimal digits set in the Decimals spinner box.|
|Money||Shows numeric values in the format shown in the Preview text box. The default format is the Windows Currency setting.|
|Date||Shows values that can be interpreted as dates in the format set in the Format Pattern edit box. An example of this format is shown in the Preview text box.|
|Time||Shows values that can be interpreted as time in the format set in the Format Pattern edit box. An example of this format is shown in the Preview text box.|
|Timestamp||Shows values that can be interpreted as date + time in the format set in the Format Pattern edit box. An example of this format is shown in the Preview text box.|
|Interval||Shows time as sequential time increment (e.g. format = mm shows the value as the number of minutes since calendar start ( 1899:12:30:24:00).|
The Show in Percent (%) button operates on the following formats: Number, Integer and Fixed to.
Decimal and Thousand separators can be set in the edit boxes of the Separators group.
In the Symbol edit boxes symbols for unit, 1000, 1000 000 and 1000 000 000 can be entered.
The ISO button sets the time, date and timestamp formatting to ISO standard.
The System button sets the formatting to system settings.
Here the Font, Font style and Size of the font to be used can be set.
The font can be set for any single object (Object Properties: Font), or all objects in a document (Apply to Objects on Document Properties: Font).
Further, the default document fonts for new objects can be set on Document Properties: Font. There are two default fonts:
- The first default font (List Boxes, Charts, etc) is used for most objects, including list boxes and charts.
- The second default font (Text Objects and Buttons) is used for buttons and text boxes, which are objects that usually need a larger font.
Finally, the default fonts for new documents can be set on User Preferences: Font.
For charts, buttons and text objects (except search objects) a font Color can also be specified. The color may Fixed or it can be dynamically Calculated from an expression. The expression must be a valid color representation, which is created using the color functions. If the result of the expression is not a valid color representation, the font color will default to black.
Additional settings are:
|Drop Shadow||If this option is checked a drop shadow will be added to the text.|
|Underline||If this option is checked the text will be underlined.|
A sample of the selected font is shown in the preview pane.
A Layout setting will apply to the current object only, if it is made
from the Object Properties
A Layout setting will apply to all objects of the specified type(s) in the document, if it is made from the Document Properties page.
Enable this setting in order to use a border around the sheet object. Specify the type of border by selecting it in the drop-down menu.
|Shadow Intensity||The Shadow Intensity drop-down menu makes it possible to set the intensity of the shadow that surrounds the sheet objects. There is also the choice of No Shadow.|
|Border Style||The following predefined border types are available:
A solid unicolored border.
Border giving the impression of depressing the sheet object from the background.
Border giving the impression of raising the sheet object from the background.
Border giving the impression of a wall around the sheet object.
|Border Width||This option is available for all border types. The width can be specified in mm, cm, inches (", inch), pixels (px, pxl, pixel), points (pt, pts, point) or docunits (du, docunit).|
|Color||Click this button to open a dialog in which an appropriate base color can be chosen from the color palette for all border types.|
|Rainbow||Creates a rainbow colored border for all border types. The rainbow will start with the selected base color on top of the sheet object.|
When Simplified is the chosen Styling Mode in Document Properties: General, there is no choice of border type, there is only the Shadow Intensity drop-down menu and the Border Width setting.
In the Rounded Corners group the general shape of the sheet object is defined. These settings allow for drawing of sheet objects ranging from perfectly circular/elliptical via super elliptical to rectangular. Rounded Corners is only available if you have selected Advanced Styling Mode in Document Properties: General.
|Rounded Corners||Checking this option makes the alternatives for rounded corner shapes possible.|
|Corners||Corners for which the check box remains unmarked will be drawn rectangular instead.|
|Squareness||A variable number between 2 and 100 where 100 defines a rectangle with perfectly square corners and 2 corresponds to a perfect ellipse (a circle for a 1:1 aspect ratio). A squareness between 2 and 5 is usually optimal for achieving rounded corners.|
|Corner Radius||This setting determines the radius of the corners in fixed distance (Fixed) or in percent of the total quadrant (Relative (%)). This setting lets you control the extent to which the corners will be affected by the underlying general shape set under Squareness. The distance can be specified in mm, cm, inches (", inch), pixels (px, pxl, pixel), points (pt, pts, point) or docunits (du, docunit).|
In the Layer group an object can be defined as residing in one of three layers:
|Bottom||A sheet object with the Bottom layer property can never obscure sheet objects in the Normal and Top layers. It can only be placed on top of other sheet objects in the Bottom layer.|
|Normal||When created, sheet objects reside in the Normal (middle) layer. A sheet object in the Normal layer can never be obscured by sheet objects in the Bottom layer and can never obscure sheet objects in the Top layer.|
|Top||A sheet object in the Top layer can never be obscured by sheet objects in the Normal and Bottom layers. Only other sheet objects in the Top layer can be placed on top of it.|
|Custom||The Top, Normal and Bottom layers correspond to internally numbered layers 1, 0 and -1 respectively. In fact all values between -128 and 127 are accepted. Choose this option to enter a value of your choice.|
Opens the Theme Maker wizard where you can create a layout theme.
Apply Theme ...
You can apply a layout theme to the object, sheet or document.
In the Show group it is possible to specify a condition under which the sheet object is displayed:
|Always||The sheet object will always be displayed.|
The sheet object will be shown or hidden depending on a conditional function which will be evaluated continuously depending on e.g. selections etc. The sheet object will only be hidden when the condition returns FALSE.
Users with Admin privileges for the document can override all show conditions by selecting Show All Sheets and Sheet Objects in Document Properties: Security. This functionality can be toggled by pressing Ctrl+Shift+S.
In the Options group, it is possible to disallow moving and resizing of the sheet object. The settings in this group are only relevant if the corresponding check boxes are enabled in Document Properties: Layout and Sheet Properties: Security.
|Allow Move/Size||If this option has been deselected it will be impossible to move or resize the sheet object.|
|Allow Copy/Clone||If this option has been deselected it will be impossible to make a copy of the sheet object.|
When the info function is in use an info icon will be displayed in the window caption whenever a field value has information associated to it. If you don't want the info icon to be displayed in the caption, you can uncheck this option.
|Size to Data||Normally the borders around all table sheet objects in QlikView will shrink when selections cause the size of the table to be less than allocated size for the sheet object. By deselecting this check box this automatic adjustment of size will be turned off leaving any surplus space blank.|
Various controls for changing the scrollbar layout are located in the Scrollbars group:
|Preserve Scroll Position||
With this setting enabled, QlikView will try to preserve the scroll position of tables and charts with a scroll bar when a selection is made in another object. The setting must be enabled in User Preferences: Objects as well.
The scroll position is not preserved when you close the document.
|Scroll Buttons||Sets the scroll button color. Select a color by clicking the button. Note that medium gray tones often render the best results for scroll bars. Either color can be defined as a solid color or a gradient via the Color Area dialog that opens when you click the appropriate button.|
Sets the scrollbar background color. Select a color by clicking the button.
|Scrollbar Width||This control affects both the width and the relative size of the scrollbar symbols.|
Sets the scroll bar style. Select a style in the drop-down control. The Classic scroll bar style corresponds to QlikView 4/5 scroll bars. The Standard scroll bar style gives a more modern look. The third style is Light, which is a thinner, lighter bar.
The Styling Mode must be set to Advanced for the scroll bar style to be visible. This setting can be found on the General tab by opening the Settings drop-down menu and selecting Document Properties.
|Apply To...||Opens the Caption and Border Properties dialog where you can set where to apply the properties that have been set on the Layout page.|
A Caption setting will apply to the current object only, if it is made
from the Object Properties
A Caption setting will apply to all objects of the specified type(s) in the document, if it is made from the Document Properties page.
On the Caption page, specify layout options that are completely different from the general layout of the object.
|Show Caption||When this option has been checked a caption will be drawn at the top of the sheet object. List boxes and other "box objects" will have the option switched on by default whereas buttons, text objects and line/arrow objects will not.|
|Title Text||In the text box you can enter a title to be shown in the caption of the sheet object. Use the Font... button to change the caption font.|
Set the colors of the caption in its different states. The settings for Active Colors and Inactive Colors can be made separately from each other.
Click the Background Color or Text Color button to open the Color Area dialog. The Background Color can be defined as a solid or a gradient color on the Color Area dialog. Text Color can be defined a Fixed or a Calculated color using color functions.
|Wrap Text||If this option is checked, the caption will be displayed in two or more rows.|
|Caption Height (Lines)||Set the number of caption lines in this edit box.|
The precise size and position of the QlikView object can be determined and adjusted by the size/position settings for the Normal or Minimized QlikView sheet object. These settings are measured in pixels:
|X-pos||Sets the horizontal position of the left side of sheet object in relation to the sheet's left edge.|
|Y-pos||Sets the vertical position of the top side of sheet object in relation to the sheet's upper edge.|
|Width||Sets the width of the QlikView sheet object.|
|Height||Sets the height of the QlikView sheet object.|
The orientation of the caption label can be altered with the Caption Alignment options:
|Horizontal||The label can be horizontally aligned: Left, Centered or Right within the caption area.|
|Vertical||The label can be vertically aligned: Top, Centered or Bottom within the caption area.|
Many of the object menu commands of the sheet objects can be configured as caption icons. Select commands to be shown as caption icons by marking the check box to the left of each command in the list.
|Allow Minimize||When this option has been checked a minimize icon will be displayed in the window caption of the sheet object, providing that the object is minimizable. Furthermore, this will make it possible to minimize the object by double-clicking the caption.|
|Auto Minimize||This option becomes available when Allow Minimize is checked. When Auto Minimize is checked for several sheet objects on the same sheet, all but one will be automatically minimized at any time. This is useful e.g. for alternately displaying several graphs in the same sheet area.|
|Allow Maximize||When this option has been checked a maximize icon will be displayed in the window caption of the sheet object, providing that the object is maximizable. Furthermore, this will make it possible to maximizing the object by double-clicking the caption. If both Allow Minimize and Allow Maximize are checked, double-clicking will effect minimizing of the object.|
Here you may enter a help text to be displayed in a pop-up window. The help text may be specified as a calculated formula. This option is not available at document level. Click the ... button to open the Edit Expression dialog for easier editing of long formulas.
Enter e.g. a description of the sheet object. A help icon will be added to the window caption of the object. When the mouse pointer is over the icon, the text will be displayed in a pop-up window.