Skip to main content Skip to complementary content

Line Layer

A Line Layer displays lines from a start point to an end point at an GeoAnalytics Map. Line width and color can be controlled by measures. The positions for start and end can be specified either as location ids (common names such as country codes, state codes, city names, postal codes etc) or latitude, longitude values.

ID

An identity of the the line.

From, To, Width Value

When location IDs are used for start and end point (see Location Options), measures are specified in the following order:
  • Location ID for start point
  • Location ID for end point
  • Measure that controls line width (optional)
When location IDs are used for the entire (poly)line (see Location Options), measures are specified in the following order (it is also possible to specify the location id in the dimension):
  • Location ID for line
  • Measure that controls line width (optional)
If coordinates are used for start and end point measures are specified in this order:
  • Latitude for start point
  • Longitude for start point
  • Latitude for end point
  • Longitude for end point
  • Measure that controls line width (optional)

Layer Options

Parameters for Layer Options
Property Use Description
Map ID default:<the most recent map of the sheet> Specify this value when there is more than one map on a sheet to tell which map to display the layer on. See Map Id in Map Settings of the Map to get the right one.
Maximum Number of Objects default:1000 To display more than a thousand object increase this value. There will be a warning if there are more objects to display.
Calculation Condition required To limit when the layer is shown you can enter a caluclation condition as an expression. The layer is calculated/shown only when the expression is fulfilled.
Calculation Condition Message required A custom error message that will be displayed in the layers legend if the calculation condition is not fulfilled. Only visible if a calculation condition has been entered.
Zoom Limit default:Min 0, Max 160000 The layer will not be displayed when zoomed further in/out than these values. To set a limit to the current scale, drag the upper or lower limit towards the other and it will snap to the current scale.
Restrict Drill Down default:0-16 When the dimension is a drill down group it is possible to restrict the layer to be active only for a a range of levels. This makes it easy to create different layers that are active in the different levels of the drill down. The top level is number 0. The range selected specifies at what levels the layer should be visible.
Include in Auto Zoom default:Yes Determines if the layer should be included when calculating area to zoom to when automatically zooming to selections.
Draw Order default:Auto Defines how the layer should be drawn compared to other layers, which ones should be drawn on top of each other.
Draw Order Category default:<Layer specific> The layers are by default drawn after the base map and the base map labels in the order Geodata Layers, Area Layers, Heatmap Layers, Line Layers, Bubble Layers. To make this layer draw in another category, adjust this value. This property is only visible when "Draw Order" is set to "Custom".
Draw Order Adjustment default:0 Increasing this value makes the layer draw later, i.e. be more visible in the category. Allowed values are in the range -10 to 10. If you want the layer to be on top of other layers in the same category increase this value, if you want it to be overdrawn by other layers in the category decrease it. This property is only visible when "Draw Order" is set to "Custom".

Location Options

Location information is either specified as longitude, latitude pairs, as identities that are looked up in an external service or as sense geometries. When the term "Location ID" is used below it means it can be a sense geometry or an identity looked up else where. When it starts with a "[" it is assumed to be a geometry in a string ([long,lat] is a point, [[long1,lat1],[long2,lat2],...] is a line, [[[long1,lat1],[long2,lat2],...]] is a multi-line or a polygon with multiple rings, [[[[long1,lat1],[long2,lat2],...]]] is a multi-polygon but also accepted as a multi-line). The external service can be something as simple as a geometry file or a more complex server based service. The server based services provide a syntax for specifying more information on identities to minimize false hits. For instance containing areas and types of features can be specified. The following is the city Hamburg in Germany:
Hamburg,DE
and this is Hamburg in Sweden:
Hamburg,SE
If you actually wanted the first order administrative area in Germany named Hamburg you also need to specify a type:
Hamburg:AADM1,DE
You can also specify multiple areas when needed. For instance in USA there are many Hamburg. To get the one in Arkansas specify:
Hamburg,AR,US
See Location Service Specification for more information on syntax to use. When there are unresolved names a warning is displayed in the upper left corner of the map.
Parameters for Location Options
Property Use Description
Location Source default:Auto Where location information comes from.
  • Auto - Automatic determination of location source based on available measures and their types.
  • Latitude, Longitude measures - Latitude and longitude values are provided in first two measures. For lines also the third and fourth measures are used as end point. This option is only available for point geometries (including start and end points for lines).
  • Dimension - The dimension is the location id. This option is only available for point geometries (not lines or areas).
  • Measure - The first measure is the location id. For lines there are two measure alternatives; One for a single location id for the entire polyline and one for using the first measure for the start point and the second for the end point.
Location Service default:different for different types of geometries URL to the location service. Either a server based service or a file as specified in "Location Service Type". An expression is accepted which makes it possible to change source dynamically. This can be used for switching file in different drill down levels for instance.
Location Service Type default:Geometry service The type of service used for location ID lookup.
Source Key Attribute optional The attribute in a geometry file to use as the location ID. This field is only visible when a file based geometry service is selected.
Advanced Location default:false The advanced location toggle controls whether to use Advanced Loction, in essence whether to use Location ID Suffix or to use Country and Type.
Country default:any The Country dropdown can be used to narrow down a lookup of a location id. Using Country is a simplified way of using Location ID Suffix (see below).
Type default:any The Type dropdown can be used to narrow down a lookup of a location id. Using Country is a simplified way of using Location ID Suffix (see below).
Location ID Suffix default: The specified string is appended to all IDs. This is a convenient way to specify more information to server based location services such as country code or type. The alternative is to use an expression in the measure that appends extra information. With the following suffix all items are specified to be cities in Sweden:
:P*,SE
See Location Service Specification for more information on syntax to use.
Manual Remap default: This provides an easy fix for incorrect location IDs. To change them to something else use a syntax like:
"value1":"remapped value1", "value2":"remapped value2", ...
Geometry Attribute default:the_geom The name of the attribute that contains the geometry (without name space). This field is only visible when Location Service Type is GML/WFS.
Reverse Coordinates default:unchecked Coordinates are expected in order latitude, longitude or Y, X. Check when coordinates comes in the other order. This field is only visible when Location Service Type is GML/WFS.

Appearance: Legend

Parameters for Appearance: Legend
Property Use Description
Show titles default:Off Display standard title.
Size legend default:Auto Controls if visibility of the parts in the left side of the legend should be in Auto or Custom.
Show sizes default:Checked Turn on/off the lines that shows min and max size. This option is only visible when "Size legend" is Custom.
Show size min/max values default:Checked Turn on/off the text labels for min and max value. This option is only visible when "Size legend" is Custom.
Show size title default:Checked Turn on/off the label at the left side of the legend. This option is only visible when "Size legend" is Custom.
Color legend default:Auto Controls if visibility of the parts in the right side of the legend should be in Auto or Custom.
Show Colors default:Checked Turn on/off the color bar. This option is only visible when "Color legend" is Custom.
Show Color Min/Max Values default:Checked Turn on/off the text labels for color values. This option is only visible when "Color legend" is Custom.
Show Color Title default:Checked Turn on/off the label at the right side of the legend. This option is only visible when "Color legend" is Custom.

Appearance: Size

Parameters for Appearance: Size
Property Use Description
Min Width default:5 The minimum line width in pixels. The lowest value will be mapped to this width.
Max Width default:20 The maximum line width in pixels. The highest value will be mapped to this width.
Min Width Value default:Auto The value in the data that is mapped to the smallest width, i.e. lines with width "Min Width". When set to Auto this value is set to the lowest value in the selection. This has the effect that line width might change for a particular line when the selection changes. If this is not the desired behavior, specify a value here.
Max Width Value default:Auto The value in the data that is mapped to the largest width, i.e. lines with width "Max Width". When set to Auto this value is set to the highest value in the selection. This has the effect that line width might change for a particular line when the selection changes. If this is not the desired behavior, specify a value here.

Appearance: Colors

Parameters for Appearance: Colors
Property Use Description
Colors default:Auto In Auto a default single color will be used.
Colors drop down default:By Measure Choose between "Single Color" "By Dimension", "By Measure" and "By Expression". "By Dimension" lets you select a dimension to color by. "By Measure" lets you select a measure to color by. "By Expression" requires for technical reasons that there is at least one measure. Additional options are displayed for the particular choices.
Transparency default:0 A slider that controls transparency of objects from no transparency to invisible.

Appearance: Line

Parameters for Appearance: Line
Property Use Description
Arrow Style default:None Controls if arrows should be drawn on lines. The alternatives are None, Forward, Backward, Both.
Arrow Position default:Start Slider that controls the arrow position, from start to end. This slider is only visible if Arrow Style is not None.
Curviness default:Straight Slider that controls if lines should be curved, from straight to max curved.

Appearance: Label

Parameters for Appearance: Label
Property Use Description
Show Label default:unchecked When checked, the label defined by the expression is displayed at each object.
Label default: An expression that is displayed as a label next to each object. Only visible when "Show Label" is checked.
Out Resolution Limit default:99999999 The label will not be displayed when zoomed further out than this value. Check "Map.Debug.Show debug info" to see current resolution. The resolution is defined as meters per pixel, i.e. the number of meters each pixel covers. Only visible when "Show Label" is checked.
Set to Current Resolution default: A button that sets the label resolution limit to the current resolution.

Appearance: Info Bubble

Parameters for Appearance: Info Bubble
Property Use Description
Show Info Bubble default:Checked When checked, a pop-up is displayed when hovering above the object.
Info Bubble default:Auto When set to Auto, the dimension and measures are displayed in the pop-up. When Custom, an expression defines what should be displayed. HTML tags can be used for formatting. For instance assuming there is a field [City Name]:
'This is <strong>' & [City Name] &'</strong>'
It is also possible to use javascript in the Info Bubbles. Simply add
'<script>SOME JAVASCRIPT</script>'
to the expression. Only visible when "Show Info Bubble" is checked.
Format Numbers default:Checked When checked, numeric values are rounded and displayed with suffixes such as k, M, G etc. Only visible when "Show Info Bubble" is checked.
Format default:Auto When Auto all numbers are formatted. When Custom, it is possible to specify which numbers should be formatted. Specify 1 for first number, 2 for second etc. Separate with comma. This option is only visible when "Format Numbers" is checked.

Did this page help you?

If you find any issues with this page or its content – a typo, a missing step, or a technical error – let us know how we can improve!